Nvidia Quadro K6000 GPUs with Quadro SyncBoard - Vmware ESXI - Passthrough

Virtual GPU Forums General Discussion
1

Dear All

Can anyone can guide me to right direction please…completely lost

I am trying to figure out if there is any compatibility issue or whatsoever in my configuration

Hardware:

Core i7 4930k Proc
Asus P9X79-WS Motherboard
64 Gig Ram
2 SSDs
2 Nvidia Quadro K6000 GPUs with Quadro SyncBoard
Vmware vSphere Esxi 6.0 update 2

Installed ESXI with 2 VMs. Passthrough K6000 and both the VMs are running perfectly 4 output each (Windows 7 x64)

Following are the issues:

Using Nvidia driver ver 362.56
Nvidia Control Panel missing mosaic feature - Got it sorted by mosaic utility
Nvidia Control Panel no option to configure Syncboard. If i check the system information, i can see the sync board but i cannot configure the sync

Anyone with this issue?.

Regards

Kazim

1.PNG
1.PNG1691×1038 102 KB

2.PNG
2.PNG1699×1041 78.4 KB

3.PNG
3.PNG1704×1039 115 KB

4.PNG
4.PNG1691×1038 99.1 KB

5.PNG
5.PNG1696×1033 136 KB

6.PNG
6.PNG1695×1027 131 KB

2

Unfortunately, Syncboard is not supported in virtual deployments.

3

Hi Jason

Thanks for the update

Is there any follow up on this…is there a development going on towards this?

Please advise

Thanks

Kazim

4

It would be a hypervisor development.

I suspect that the demand is quite low for VMware to prioritise developing this particularly when there are features in high demand for more mainstream GPU usage in a VM.