Nvidia SDK manager fails to flash the device

vishal.purohit · August 30, 2019, 3:06pm

Hey,

Following is log I got while flashing Jetson Tx2 with Jetpack 4.2.1 via SDK Manager.

20:24:07 INFO : Flash Jetson TX2 : 4417: SKP: 4096( 1 blks) ==> 3798699816:12
20:24:07 ERROR : Flash Jetson TX2 : 4418: RAW: 32768( 8 blks) ==> 3798699828:32780
20:24:07 INFO : Flash Jetson TX2 : 4419: SKP: 4096( 1 blks) ==> 3798732608:12
20:24:07 ERROR : Flash Jetson TX2 : 4420: RAW: 110592( 27 blks) ==> 3798732620:110604
20:24:07 INFO : Flash Jetson TX2 : 4421: SKP: 4096( 1 blks) ==> 3798843224:12
20:24:07 ERROR : Flash Jetson TX2 : 4422: RAW: 61440( 15 blks) ==> 3798843236:61452
20:24:07 INFO : Flash Jetson TX2 : 4423: SKP: 4096( 1 blks) ==> 3798904688:12
20:24:07 ERROR : Flash Jetson TX2 : 4424: RAW: 69632( 17 blks) ==> 3798904700:69644
20:24:07 INFO : Flash Jetson TX2 : 4425: SKP: 4096( 1 blks) ==> 3798974344:12
20:24:07 ERROR : Flash Jetson TX2 : 4426: RAW: 32768( 8 blks) ==> 3798974356:32780
20:24:07 INFO : Flash Jetson TX2 : 4427: SKP: 4096( 1 blks) ==> 3799007136:12
20:24:07 ERROR : Flash Jetson TX2 : 4428: RAW: 40960( 10 blks) ==> 3799007148:40972
20:24:07 INFO : Flash Jetson TX2 : 4429: SKP: 4096( 1 blks) ==> 3799048120:12
20:24:07 ERROR : Flash Jetson TX2 : 4430: RAW: 94208( 23 blks) ==> 3799048132:94220
20:24:07 INFO : Flash Jetson TX2 : 4431: SKP: 4096( 1 blks) ==> 3799142352:12
20:24:07 ERROR : Flash Jetson TX2 : 4432: RAW: 94208( 23 blks) ==> 3799142364:94220
20:24:07 INFO : Flash Jetson TX2 : 4433: SKP: 4096( 1 blks) ==> 3799236584:12
20:24:07 ERROR : Flash Jetson TX2 : 4434: RAW: 32768( 8 blks) ==> 3799236596:32780
20:24:07 ERROR : Flash Jetson TX2 : 4435: SKP: 4096( 1 blks) ==> 3799269376:12
20:24:07 ERROR : Flash Jetson TX2 : 4436: RAW: 32768( 8 blks) ==> 3799269388:32780
20:24:07 INFO : Flash Jetson TX2 : 4437: SKP: 4096( 1 blks) ==> 3799302168:12
20:24:07 ERROR : Flash Jetson TX2 : 4438: RAW: 32768( 8 blks) ==> 3799302180:32780
20:24:07 INFO : Flash Jetson TX2 : 4439: SKP: 4096( 1 blks) ==> 3799334960:12
20:24:07 ERROR : Flash Jetson TX2 : 4440: RAW: 421888( 103 blks) ==> 3799334972:421900
20:24:07 INFO : Flash Jetson TX2 : 4441: SKP: 4096( 1 blks) ==> 3799756872:12
20:24:07 ERROR : Flash Jetson TX2 : 4442: RAW: 81920( 20 blks) ==> 3799756884:81932
20:24:07 INFO : Flash Jetson TX2 : 4443: SKP: 4096( 1 blks) ==> 3799838816:12
20:24:07 ERROR : Flash Jetson TX2 : 4444: RAW: 32768( 8 blks) ==> 3799838828:32780
20:24:07 INFO : Flash Jetson TX2 : 4445: SKP: 4096( 1 blks) ==> 3799871608:12
20:24:07 ERROR : Flash Jetson TX2 : 4446: RAW: 32768( 8 blks) ==> 3799871620:32780
20:24:07 INFO : Flash Jetson TX2 : 4447: SKP: 4096( 1 blks) ==> 3799904400:12
20:24:07 ERROR : Flash Jetson TX2 : 4448: RAW: 32768( 8 blks) ==> 3799904412:32780
20:24:07 ERROR : Flash Jetson TX2 : 4449: SKP: 4096( 1 blks) ==> 3799937192:12
20:24:07 ERROR : Flash Jetson TX2 : 4450: RAW: 40960( 10 blks) ==> 3799937204:40972
20:24:07 INFO : Flash Jetson TX2 : 4451: SKP: 4096( 1 blks) ==> 3799978176:12
20:24:07 ERROR : Flash Jetson TX2 : 4452: RAW: 36864( 9 blks) ==> 3799978188:36876
20:24:07 ERROR : Flash Jetson TX2 : 4453: SKP: 8192( 2 blks) ==> 3800015064:12
20:24:07 ERROR : Flash Jetson TX2 : 4454: RAW: 86016( 21 blks) ==> 3800015076:86028
20:24:07 INFO : Flash Jetson TX2 : 4455: SKP: 4096( 1 blks) ==> 3800101104:12
20:24:07 ERROR : Flash Jetson TX2 : 4456: RAW: 28672( 7 blks) ==> 3800101116:28684
20:24:07 INFO : Flash Jetson TX2 : 4457: SKP: 4096( 1 blks) ==> 3800129800:12
20:24:07 ERROR : Flash Jetson TX2 : 4458: RAW: 69632( 17 blks) ==> 3800129812:69644
20:24:07 INFO : Flash Jetson TX2 : 4459: SKP: 4096( 1 blks) ==> 3800199456:12
20:24:07 ERROR : Flash Jetson TX2 : 4460: RAW: 32768( 8 blks) ==> 3800199468:32780
20:24:07 ERROR : Flash Jetson TX2 : 4461: SKP: 4096( 1 blks) ==> 3800232248:12
20:24:07 ERROR : Flash Jetson TX2 : 4462: RAW: 86859776( 21206 blks) ==> 3800232260:86859788
20:24:07 ERROR : Flash Jetson TX2 : 4463: SKP: 3338240( 815 blks) ==> 3887092048:12
20:24:07 ERROR : Flash Jetson TX2 : 4464: RAW: 33554432( 8192 blks) ==> 3887092060:33554444
20:24:08 ERROR : Flash Jetson TX2 : 4465: SKP: 1879048192( 458752 blks) ==> 3920646504:12
20:24:08 INFO : Flash Jetson TX2 : 4466: RAW: 8192( 2 blks) ==> 3920646516:8204
20:24:08 ERROR : Flash Jetson TX2 : 4467: SKP: 57344( 14 blks) ==> 3920654720:12
20:24:08 ERROR : Flash Jetson TX2 : 4468: RAW: 8192( 2 blks) ==> 3920654732:8204
20:24:08 ERROR : Flash Jetson TX2 : 4469: SKP: 57344( 14 blks) ==> 3920662936:12
20:24:08 ERROR : Flash Jetson TX2 : 4470: RAW: 3092480( 755 blks) ==> 3920662948:3092492
20:24:08 ERROR : Flash Jetson TX2 : 4471: SKP: 30461952( 7437 blks) ==> 3923755440:12
20:24:08 ERROR : Flash Jetson TX2 : 4472: RAW: 1765376( 431 blks) ==> 3923755452:1765388
20:24:08 ERROR : Flash Jetson TX2 : 4473: SKP: 98766848( 24113 blks) ==> 3925520840:12
20:24:08 ERROR : Flash Jetson TX2 : 4474: RAW: 67010560( 16360 blks) ==> 3925520852:67010572
20:24:08 INFO : Flash Jetson TX2 : 4475: SKP: 98304( 24 blks) ==> 3992531424:12
20:24:08 ERROR : Flash Jetson TX2 : 4476: RAW: 36225024( 8844 blks) ==> 3992531436:36225036
20:24:09 ERROR : Flash Jetson TX2 : 4477: SKP: 1909932032( 466292 blks) ==> 4028756472:12
20:24:09 INFO : Flash Jetson TX2 : 4478: RAW: 16384( 4 blks) ==> 4028756484:16396
20:24:09 INFO : Flash Jetson TX2 : 4479: SKP: 49152( 12 blks) ==> 4028772880:12
20:24:09 INFO : Flash Jetson TX2 : 4480: RAW: 8192( 2 blks) ==> 4028772892:8204
20:24:09 ERROR : Flash Jetson TX2 : 4481: SKP: 57344( 14 blks) ==> 4028781096:12
20:24:09 ERROR : Flash Jetson TX2 : 4482: RAW: 3731456( 911 blks) ==> 4028781108:3731468
20:24:09 ERROR : Flash Jetson TX2 : 4483: SKP: 29822976( 7281 blks) ==> 4032512576:12
20:24:09 ERROR : Flash Jetson TX2 : 4484: RAW: 6459392( 1577 blks) ==> 4032512588:6459404
20:24:09 ERROR : Flash Jetson TX2 : 4485: SKP: 94072832( 22967 blks) ==> 4038971992:12
20:24:09 ERROR : Flash Jetson TX2 : 4486: RAW: 6373376( 1556 blks) ==> 4038972004:6373388
20:24:09 INFO : Flash Jetson TX2 : 4487: SKP: 61440( 15 blks) ==> 4045345392:12
20:24:09 ERROR : Flash Jetson TX2 : 4488: RAW: 6565888( 1603 blks) ==> 4045345404:6565900
20:24:09 INFO : Flash Jetson TX2 : 4489: SKP: 8192( 2 blks) ==> 4051911304:12
20:24:09 ERROR : Flash Jetson TX2 : 4490: RAW: 7000064( 1709 blks) ==> 4051911316:7000076
20:24:09 INFO : Flash Jetson TX2 : 4491: SKP: 16384( 4 blks) ==> 4058911392:12
20:24:09 ERROR : Flash Jetson TX2 : 4492: RAW: 241664( 59 blks) ==> 4058911404:241676
20:24:09 ERROR : Flash Jetson TX2 : 4493: SKP: 364544( 89 blks) ==> 4059153080:12
20:24:09 ERROR : Flash Jetson TX2 : 4494: RAW: 18739200( 4575 blks) ==> 4059153092:18739212
20:24:09 INFO : Flash Jetson TX2 : 4495: SKP: 61440( 15 blks) ==> 4077892304:12
20:24:09 ERROR : Flash Jetson TX2 : 4496: RAW: 610304( 149 blks) ==> 4077892316:610316
20:24:09 ERROR : Flash Jetson TX2 : 4497: SKP: 61440( 15 blks) ==> 4078502632:12
20:24:09 ERROR : Flash Jetson TX2 : 4498: RAW: 4632576( 1131 blks) ==> 4078502644:4632588
20:24:09 ERROR : Flash Jetson TX2 : 4499: SKP: 49152( 12 blks) ==> 4083135232:12
20:24:09 ERROR : Flash Jetson TX2 : 4500: RAW: 110592( 27 blks) ==> 4083135244:110604
20:24:09 INFO : Flash Jetson TX2 : 4501: SKP: 4096( 1 blks) ==> 4083245848:12
20:24:09 ERROR : Flash Jetson TX2 : 4502: RAW: 3641344( 889 blks) ==> 4083245860:3641356
20:24:09 INFO : Flash Jetson TX2 : 4503: SKP: 61440( 15 blks) ==> 4086887216:12
20:24:09 ERROR : Flash Jetson TX2 : 4504: RAW: 4632576( 1131 blks) ==> 4086887228:4632588
20:24:09 ERROR : Flash Jetson TX2 : 4505: SKP: 61440( 15 blks) ==> 4091519816:12
20:24:09 ERROR : Flash Jetson TX2 : 4506: RAW: 21983232( 5367 blks) ==> 4091519828:21983244
20:24:09 INFO : Flash Jetson TX2 : 4507: SKP: 4096( 1 blks) ==> 4113503072:12
20:24:09 ERROR : Flash Jetson TX2 : 4508: RAW: 1830912( 447 blks) ==> 4113503084:1830924
20:24:09 INFO : Flash Jetson TX2 : 4509: SKP: 4096( 1 blks) ==> 4115334008:12
20:24:09 ERROR : Flash Jetson TX2 : 4510: RAW: 7507968( 1833 blks) ==> 4115334020:7507980
20:24:09 INFO : Flash Jetson TX2 : 4511: SKP: 61440( 15 blks) ==> 4122842000:12
20:24:09 ERROR : Flash Jetson TX2 : 4512: RAW: 364544( 89 blks) ==> 4122842012:364556
20:24:09 ERROR : Flash Jetson TX2 : 4513: SKP: 61440( 15 blks) ==> 4123206568:12
20:24:09 ERROR : Flash Jetson TX2 : 4514: RAW: 667648( 163 blks) ==> 4123206580:667660
20:24:09 INFO : Flash Jetson TX2 : 4515: SKP: 8192( 2 blks) ==> 4123874240:12
20:24:09 ERROR : Flash Jetson TX2 : 4516: RAW: 14790656( 3611 blks) ==> 4123874252:14790668
20:24:09 INFO : Flash Jetson TX2 : 4517: SKP: 36864( 9 blks) ==> 4138664920:12
20:24:09 ERROR : Flash Jetson TX2 : 4518: RAW: 12288( 3 blks) ==> 4138664932:12300
20:24:09 INFO : Flash Jetson TX2 : 4519: SKP: 4096( 1 blks) ==> 4138677232:12
20:24:09 ERROR : Flash Jetson TX2 : 4520: RAW: 8626176( 2106 blks) ==> 4138677244:8626188
20:24:09 INFO : Flash Jetson TX2 : 4521: SKP: 4096( 1 blks) ==> 4147303432:12
20:24:09 INFO : Flash Jetson TX2 : 4522: RAW: 16384( 4 blks) ==> 4147303444:16396
20:24:09 INFO : Flash Jetson TX2 : 4523: SKP: 12288( 3 blks) ==> 4147319840:12
20:24:09 INFO : Flash Jetson TX2 : 4524: RAW: 4096( 1 blks) ==> 4147319852:4108
20:24:09 INFO : Flash Jetson TX2 : 4525: SKP: 4096( 1 blks) ==> 4147323960:12
20:24:09 INFO : Flash Jetson TX2 : 4526: RAW: 4096( 1 blks) ==> 4147323972:4108
20:24:09 INFO : Flash Jetson TX2 : 4527: SKP: 4096( 1 blks) ==> 4147328080:12
20:24:09 ERROR : Flash Jetson TX2 : 4528: RAW: 1523712( 372 blks) ==> 4147328092:1523724
20:24:09 ERROR : Flash Jetson TX2 : 4529: SKP: 294912( 72 blks) ==> 4148851816:12
20:24:09 ERROR : Flash Jetson TX2 : 4530: RAW: 1941504( 474 blks) ==> 4148851828:1941516
20:24:09 INFO : Flash Jetson TX2 : 4531: SKP: 61440( 15 blks) ==> 4150793344:12
20:24:09 ERROR : Flash Jetson TX2 : 4532: RAW: 10264576( 2506 blks) ==> 4150793356:10264588
20:24:09 INFO : Flash Jetson TX2 : 4533: SKP: 61440( 15 blks) ==> 4161057944:12
20:24:09 ERROR : Flash Jetson TX2 : 4534: RAW: 667648( 163 blks) ==> 4161057956:667660
20:24:09 INFO : Flash Jetson TX2 : 4535: SKP: 8192( 2 blks) ==> 4161725616:12
20:24:09 ERROR : Flash Jetson TX2 : 4536: RAW: 323584( 79 blks) ==> 4161725628:323596
20:24:09 ERROR : Flash Jetson TX2 : 4537: SKP: 61440( 15 blks) ==> 4162049224:12
20:24:09 ERROR : Flash Jetson TX2 : 4538: RAW: 872448( 213 blks) ==> 4162049236:872460
20:24:09 ERROR : Flash Jetson TX2 : 4539: SKP: 61440( 15 blks) ==> 4162921696:12
20:24:09 ERROR : Flash Jetson TX2 : 4540: RAW: 1855488( 453 blks) ==> 4162921708:1855500
20:24:09 INFO : Flash Jetson TX2 : 4541: SKP: 61440( 15 blks) ==> 4164777208:12
20:24:09 ERROR : Flash Jetson TX2 : 4542: RAW: 1138688( 278 blks) ==> 4164777220:1138700
20:24:09 ERROR : Flash Jetson TX2 : 4543: SKP: 61440( 15 blks) ==> 4165915920:12
20:24:09 ERROR : Flash Jetson TX2 : 4544: RAW: 1847296( 451 blks) ==> 4165915932:1847308
20:24:09 ERROR : Flash Jetson TX2 : 4545: SKP: 61440( 15 blks) ==> 4167763240:12
20:24:09 ERROR : Flash Jetson TX2 : 4546: RAW: 1019904( 249 blks) ==> 4167763252:1019916
20:24:09 ERROR : Flash Jetson TX2 : 4547: SKP: 61440( 15 blks) ==> 4168783168:12
20:24:09 ERROR : Flash Jetson TX2 : 4548: RAW: 1196032( 292 blks) ==> 4168783180:1196044
20:24:09 ERROR : Flash Jetson TX2 : 4549: SKP: 61440( 15 blks) ==> 4169979224:12
20:24:09 ERROR : Flash Jetson TX2 : 4550: RAW: 245760( 60 blks) ==> 4169979236:245772
20:24:09 ERROR : Flash Jetson TX2 : 4551: SKP: 61440( 15 blks) ==> 4170225008:12
20:24:09 ERROR : Flash Jetson TX2 : 4552: RAW: 98377728( 24018 blks) ==> 4170225020:98377740
20:24:09 INFO : Flash Jetson TX2 : 4553: SKP: 8192( 2 blks) ==> 4268602760:12
20:24:09 ERROR : Flash Jetson TX2 : 4554: RAW: 18628608( 4548 blks) ==> 4268602772:18628620
20:24:09 INFO : Flash Jetson TX2 : 4555: SKP: 4096( 1 blks) ==> 4287231392:12
20:24:09 ERROR : Flash Jetson TX2 : 4556: RAW: 22454272( 5482 blks) ==> 4287231404:22454284
20:24:09 INFO : Flash Jetson TX2 : 4557: SKP: 61440( 15 blks) ==> 4309685688:12
20:24:09 ERROR : Flash Jetson TX2 : 4558: RAW: 319488( 78 blks) ==> 4309685700:319500
20:24:09 ERROR : Flash Jetson TX2 : 4559: SKP: 61440( 15 blks) ==> 4310005200:12
20:24:09 ERROR : Flash Jetson TX2 : 4560: RAW: 1421312( 347 blks) ==> 4310005212:1421324
20:24:09 ERROR : Flash Jetson TX2 : 4561: SKP: 61440( 15 blks) ==> 4311426536:12
20:24:09 ERROR : Flash Jetson TX2 : 4562: RAW: 27467776( 6706 blks) ==> 4311426548:27467788
20:24:09 ERROR : Flash Jetson TX2 : 4563: SKP: 33554432( 8192 blks) ==> 4338894336:12
20:24:09 ERROR : Flash Jetson TX2 : 4564: RAW: 12582912( 3072 blks) ==> 4338894348:12582924
20:24:10 ERROR : Flash Jetson TX2 : 4565: SKP: 1665138688( 406528 blks) ==> 4351477272:12
20:24:10 INFO : Flash Jetson TX2 : -- Total: ---------------------------------------------------
20:24:10 INFO : Flash Jetson TX2 : 4566 CHUNK 30064771072(7340032 blks) ==> 4351477284(1062359 blks)
20:24:10 INFO : Flash Jetson TX2 :
20:24:10 INFO : Flash Jetson TX2 : done.
20:24:10 INFO : Flash Jetson TX2 : system.img built successfully.
20:24:10 INFO : Flash Jetson TX2 : Existing tbcfile(/home/ruthra/nvidia/nvidia_sdk/JetPack_4.2.1_Linux_GA_P3310/Linux_for_Tegra/bootloader/cboot.bin) reused.
20:24:10 INFO : Flash Jetson TX2 : copying tbcdtbfile(/home/ruthra/nvidia/nvidia_sdk/JetPack_4.2.1_Linux_GA_P3310/Linux_for_Tegra/kernel/dtb/tegra186-quill-p3310-1000-c03-00-base.dtb)... done.
20:24:10 INFO : Flash Jetson TX2 : copying cfgfile(/home/ruthra/nvidia/nvidia_sdk/JetPack_4.2.1_Linux_GA_P3310/Linux_for_Tegra/bootloader/t186ref/cfg/flash_l4t_t186.xml) to flash.xml... done.
20:24:10 INFO : Flash Jetson TX2 : Existing flasher(/home/ruthra/nvidia/nvidia_sdk/JetPack_4.2.1_Linux_GA_P3310/Linux_for_Tegra/bootloader/nvtboot_recovery_cpu.bin) reused.
20:24:10 INFO : Flash Jetson TX2 : Existing flashapp(/home/ruthra/nvidia/nvidia_sdk/JetPack_4.2.1_Linux_GA_P3310/Linux_for_Tegra/bootloader/tegraflash.py) reused.
20:24:10 INFO : Flash Jetson TX2 : ./tegraflash.py --bl nvtboot_recovery_cpu.bin --sdram_config P3310_A00_8GB_Samsung_8GB_lpddr4_204Mhz_A02_l4t.cfg --odmdata 0x1090000 --applet mb1_recovery_prod.bin --cmd "flash; reboot" --cfg flash.xml --chip 0x18 --misc_config tegra186-mb1-bct-misc-si-l4t.cfg --pinmux_config tegra186-mb1-bct-pinmux-quill-p3310-1000-c03.cfg --pmic_config tegra186-mb1-bct-pmic-quill-p3310-1000-c04.cfg --pmc_config tegra186-mb1-bct-pad-quill-p3310-1000-c03.cfg --prod_config tegra186-mb1-bct-prod-quill-p3310-1000-c03.cfg --scr_config minimal_scr.cfg --scr_cold_boot_config mobile_scr.cfg --br_cmd_config tegra186-mb1-bct-bootrom-quill-p3310-1000-c03.cfg --dev_params emmc.cfg --bins "mb2_bootloader nvtboot_recovery.bin; mts_preboot preboot_d15_prod_cr.bin; mts_bootpack mce_mts_d15_prod_cr.bin; bpmp_fw bpmp.bin; bpmp_fw_dtb tegra186-a02-bpmp-quill-p3310-1000-c04-00-te770d-ucm2.dtb; tlk tos-trusty.img; eks eks.img; bootloader_dtb tegra186-quill-p3310-1000-c03-00-base.dtb"
20:24:10 INFO : Flash Jetson TX2 : saving flash command in /home/ruthra/nvidia/nvidia_sdk/JetPack_4.2.1_Linux_GA_P3310/Linux_for_Tegra/bootloader/flashcmd.txt
20:24:11 INFO : Flash Jetson TX2 : saving Windows flash command to /home/ruthra/nvidia/nvidia_sdk/JetPack_4.2.1_Linux_GA_P3310/Linux_for_Tegra/bootloader/flash_win.bat
20:24:11 INFO : Flash Jetson TX2 : *** Flashing target device started. ***
20:24:11 INFO : Flash Jetson TX2 : Welcome to Tegra Flash
20:24:11 INFO : Flash Jetson TX2 : version 1.0.0
20:24:11 INFO : Flash Jetson TX2 : Type ? or help for help and q or quit to exit
20:24:11 INFO : Flash Jetson TX2 : Use ! to execute system commands
20:24:11 INFO : Flash Jetson TX2 :
20:24:11 INFO : Flash Jetson TX2 : [ 0.0016 ] tegrasign_v2 --key None --getmode mode.txt
20:24:11 INFO : Flash Jetson TX2 : [ 0.0029 ] Assuming zero filled SBK key
20:24:11 INFO : Flash Jetson TX2 : [ 0.0032 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.0032 ] Generating RCM messages
20:24:11 INFO : Flash Jetson TX2 : [ 0.0046 ] tegrarcm_v2 --listrcm rcm_list.xml --chip 0x18 0 --download rcm mb1_recovery_prod.bin 0 0
20:24:11 INFO : Flash Jetson TX2 : [ 0.0058 ] RCM 0 is saved as rcm_0.rcm
20:24:11 INFO : Flash Jetson TX2 : [ 0.0063 ] RCM 1 is saved as rcm_1.rcm
20:24:11 INFO : Flash Jetson TX2 : [ 0.0063 ] List of rcm files are saved in rcm_list.xml
20:24:11 INFO : Flash Jetson TX2 : [ 0.0063 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.0063 ] Signing RCM messages
20:24:11 INFO : Flash Jetson TX2 : [ 0.0075 ] tegrasign_v2 --key None --list rcm_list.xml --pubkeyhash pub_key.key
20:24:11 INFO : Flash Jetson TX2 : [ 0.0088 ] Assuming zero filled SBK key
20:24:11 INFO : Flash Jetson TX2 : [ 0.0147 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.0147 ] Copying signature to RCM mesages
20:24:11 INFO : Flash Jetson TX2 : [ 0.0163 ] tegrarcm_v2 --chip 0x18 0 --updatesig rcm_list_signed.xml
20:24:11 INFO : Flash Jetson TX2 : [ 0.0184 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.0184 ] Parsing partition layout
20:24:11 INFO : Flash Jetson TX2 : [ 0.0569 ] tegraparser_v2 --pt flash.xml.tmp
20:24:11 INFO : Flash Jetson TX2 : [ 0.0595 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.0595 ] Creating list of images to be signed
20:24:11 INFO : Flash Jetson TX2 : [ 0.0635 ] tegrahost_v2 --chip 0x18 0 --partitionlayout flash.xml.bin --list images_list.xml zerosbk
20:24:11 INFO : Flash Jetson TX2 : [ 0.1206 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.1206 ] Generating signatures
20:24:11 INFO : Flash Jetson TX2 : [ 0.1223 ] tegrasign_v2 --key None --list images_list.xml --pubkeyhash pub_key.key
20:24:11 INFO : Flash Jetson TX2 : [ 0.1239 ] Assuming zero filled SBK key
20:24:11 INFO : Flash Jetson TX2 : [ 0.3694 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.3695 ] Generating br-bct
20:24:11 INFO : Flash Jetson TX2 : [ 0.4016 ] Updating dev and MSS params in BR BCT
20:24:11 INFO : Flash Jetson TX2 : [ 0.4017 ] tegrabct_v2 --dev_param emmc.cfg --sdram P3310_A00_8GB_Samsung_8GB_lpddr4_204Mhz_A02_l4t.cfg --brbct br_bct.cfg --chip 0x18 0
20:24:11 INFO : Flash Jetson TX2 : [ 0.4336 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.4336 ] Updating bl info
20:24:11 INFO : Flash Jetson TX2 : [ 0.4351 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x18 0 --updateblinfo flash.xml.bin --updatesig images_list_signed.xml
20:24:11 INFO : Flash Jetson TX2 : [ 0.4394 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.4395 ] Updating smd info
20:24:11 INFO : Flash Jetson TX2 : [ 0.4407 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x18 --updatesmdinfo flash.xml.bin
20:24:11 INFO : Flash Jetson TX2 : [ 0.4422 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.4422 ] Updating Odmdata
20:24:11 INFO : Flash Jetson TX2 : [ 0.4435 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x18 0 --updatefields Odmdata =0x1090000
20:24:11 INFO : Flash Jetson TX2 : [ 0.4458 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.4459 ] Get Signed section of bct
20:24:11 INFO : Flash Jetson TX2 : [ 0.4471 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x18 0 --listbct bct_list.xml
20:24:11 INFO : Flash Jetson TX2 : [ 0.4484 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.4495 ] tegrasign_v2 --key None --list bct_list.xml --pubkeyhash pub_key.key
20:24:11 INFO : Flash Jetson TX2 : [ 0.4510 ] Assuming zero filled SBK key
20:24:11 INFO : Flash Jetson TX2 : [ 0.4514 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.4514 ] Updating BCT with signature
20:24:11 INFO : Flash Jetson TX2 : [ 0.4528 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x18 0 --updatesig bct_list_signed.xml
20:24:11 INFO : Flash Jetson TX2 : [ 0.4547 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.4547 ] Generating coldboot mb1-bct
20:24:11 INFO : Flash Jetson TX2 : [ 0.4561 ] tegrabct_v2 --chip 0x18 0 --mb1bct mb1_cold_boot_bct.cfg --sdram P3310_A00_8GB_Samsung_8GB_lpddr4_204Mhz_A02_l4t.cfg --misc tegra186-mb1-bct-misc-si-l4t.cfg --scr mobile_scr.cfg --pinmux tegra186-mb1-bct-pinmux-quill-p3310-1000-c03.cfg --pmc tegra186-mb1-bct-pad-quill-p3310-1000-c03.cfg --pmic tegra186-mb1-bct-pmic-quill-p3310-1000-c04.cfg --brcommand tegra186-mb1-bct-bootrom-quill-p3310-1000-c03.cfg --prod tegra186-mb1-bct-prod-quill-p3310-1000-c03.cfg
20:24:11 INFO : Flash Jetson TX2 : [ 0.4575 ] MB1-BCT version: 0xf
20:24:11 INFO : Flash Jetson TX2 : [ 0.4577 ] Copying Sdram info from 2 to 3 set
20:24:11 INFO : Flash Jetson TX2 : [ 0.4816 ] Packing sdram param for instance[0]
20:24:11 INFO : Flash Jetson TX2 : [ 0.4818 ] Packing sdram param for instance[1]
20:24:11 INFO : Flash Jetson TX2 : [ 0.4821 ] Packing sdram param for instance[2]
20:24:11 INFO : Flash Jetson TX2 : [ 0.4824 ] Packing sdram param for instance[3]
20:24:11 INFO : Flash Jetson TX2 :
20:24:11 INFO : Flash Jetson TX2 : [ 0.4827 ] Parsing config file :tegra186-mb1-bct-pinmux-quill-p3310-1000-c03.cfg
20:24:11 INFO : Flash Jetson TX2 : [ 0.4832 ] Appending platform config data of size :- 3048
20:24:11 INFO : Flash Jetson TX2 :
20:24:11 INFO : Flash Jetson TX2 : [ 0.4836 ] Parsing config file :mobile_scr.cfg
20:24:11 INFO : Flash Jetson TX2 : [ 0.4840 ] Appending platform config data of size :- 12240
20:24:11 INFO : Flash Jetson TX2 :
20:24:11 INFO : Flash Jetson TX2 : [ 0.4844 ] Parsing config file :tegra186-mb1-bct-pad-quill-p3310-1000-c03.cfg
20:24:11 INFO : Flash Jetson TX2 : [ 0.4846 ] Appending platform config data of size :- 24
20:24:11 INFO : Flash Jetson TX2 : [ 0.4846 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.4846 ] Parsing config file :tegra186-mb1-bct-pmic-quill-p3310-1000-c04.cfg
20:24:11 INFO : Flash Jetson TX2 : [ 0.4846 ] Appending platform config data of size :- 648
20:24:11 INFO : Flash Jetson TX2 : [ 0.4846 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.4846 ] Parsing config file :tegra186-mb1-bct-bootrom-quill-p3310-1000-c03.cfg
20:24:11 INFO : Flash Jetson TX2 : [ 0.4846 ] Appending platform config data of size :- 64
20:24:11 INFO : Flash Jetson TX2 : [ 0.4846 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.4846 ] Parsing config file :tegra186-mb1-bct-prod-quill-p3310-1000-c03.cfg
20:24:11 INFO : Flash Jetson TX2 : [ 0.4847 ] Appending platform config data of size :- 1628
20:24:11 INFO : Flash Jetson TX2 : [ 0.4847 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.4847 ] Updating mb1-bct with firmware information
20:24:11 INFO : Flash Jetson TX2 : [ 0.4858 ] tegrabct_v2 --chip 0x18 --mb1bct mb1_cold_boot_bct_MB1.bct --updatefwinfo flash.xml.bin
20:24:11 INFO : Flash Jetson TX2 : [ 0.4869 ] MB1-BCT version: 0xf
20:24:11 INFO : Flash Jetson TX2 : [ 0.4877 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.4877 ] Updating mb1-bct with storage information
20:24:11 INFO : Flash Jetson TX2 : [ 0.4890 ] tegrabct_v2 --chip 0x18 --mb1bct mb1_cold_boot_bct_MB1.bct --updatestorageinfo flash.xml.bin
20:24:11 INFO : Flash Jetson TX2 : [ 0.4900 ] MB1-BCT version: 0xf
20:24:11 INFO : Flash Jetson TX2 : [ 0.4910 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.4920 ] tegrahost_v2 --chip 0x18 --align mb1_cold_boot_bct_MB1.bct
20:24:11 INFO : Flash Jetson TX2 : [ 0.4932 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.4944 ] tegrahost_v2 --appendsigheader mb1_cold_boot_bct_MB1.bct zerosbk
20:24:11 INFO : Flash Jetson TX2 : [ 0.4959 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.4974 ] tegrasign_v2 --key None --list mb1_cold_boot_bct_MB1_sigheader.bct_list.xml
20:24:11 INFO : Flash Jetson TX2 : [ 0.4986 ] Assuming zero filled SBK key
20:24:11 INFO : Flash Jetson TX2 : [ 0.5014 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.5031 ] tegrahost_v2 --updatesigheader mb1_cold_boot_bct_MB1_sigheader.bct.encrypt mb1_cold_boot_bct_MB1_sigheader.bct.hash zerosbk
20:24:11 INFO : Flash Jetson TX2 : [ 0.5046 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.5047 ] Generating recovery mb1-bct
20:24:11 INFO : Flash Jetson TX2 : [ 0.5060 ] tegrabct_v2 --chip 0x18 0 --mb1bct mb1_bct.cfg --sdram P3310_A00_8GB_Samsung_8GB_lpddr4_204Mhz_A02_l4t.cfg --misc tegra186-mb1-bct-misc-si-l4t.cfg --scr minimal_scr.cfg --pinmux tegra186-mb1-bct-pinmux-quill-p3310-1000-c03.cfg --pmc tegra186-mb1-bct-pad-quill-p3310-1000-c03.cfg --pmic tegra186-mb1-bct-pmic-quill-p3310-1000-c04.cfg --brcommand tegra186-mb1-bct-bootrom-quill-p3310-1000-c03.cfg --prod tegra186-mb1-bct-prod-quill-p3310-1000-c03.cfg
20:24:11 INFO : Flash Jetson TX2 : [ 0.5073 ] MB1-BCT version: 0xf
20:24:11 INFO : Flash Jetson TX2 : [ 0.5075 ] Copying Sdram info from 2 to 3 set
20:24:11 INFO : Flash Jetson TX2 : [ 0.5315 ] Packing sdram param for instance[0]
20:24:11 INFO : Flash Jetson TX2 : [ 0.5318 ] Packing sdram param for instance[1]
20:24:11 INFO : Flash Jetson TX2 : [ 0.5320 ] Packing sdram param for instance[2]
20:24:11 INFO : Flash Jetson TX2 : [ 0.5322 ] Packing sdram param for instance[3]
20:24:11 INFO : Flash Jetson TX2 :
20:24:11 INFO : Flash Jetson TX2 : [ 0.5325 ] Parsing config file :tegra186-mb1-bct-pinmux-quill-p3310-1000-c03.cfg
20:24:11 INFO : Flash Jetson TX2 : [ 0.5331 ] Appending platform config data of size :- 3048
20:24:11 INFO : Flash Jetson TX2 :
20:24:11 INFO : Flash Jetson TX2 : [ 0.5338 ] Parsing config file :minimal_scr.cfg
20:24:11 INFO : Flash Jetson TX2 : [ 0.5343 ] Appending platform config data of size :- 12240
20:24:11 INFO : Flash Jetson TX2 : [ 0.5343 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.5343 ] Parsing config file :tegra186-mb1-bct-pad-quill-p3310-1000-c03.cfg
20:24:11 INFO : Flash Jetson TX2 : [ 0.5343 ] Appending platform config data of size :- 24
20:24:11 INFO : Flash Jetson TX2 : [ 0.5343 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.5344 ] Parsing config file :tegra186-mb1-bct-pmic-quill-p3310-1000-c04.cfg
20:24:11 INFO : Flash Jetson TX2 : [ 0.5344 ] Appending platform config data of size :- 648
20:24:11 INFO : Flash Jetson TX2 : [ 0.5344 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.5344 ] Parsing config file :tegra186-mb1-bct-bootrom-quill-p3310-1000-c03.cfg
20:24:11 INFO : Flash Jetson TX2 : [ 0.5344 ] Appending platform config data of size :- 64
20:24:11 INFO : Flash Jetson TX2 : [ 0.5344 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.5344 ] Parsing config file :tegra186-mb1-bct-prod-quill-p3310-1000-c03.cfg
20:24:11 INFO : Flash Jetson TX2 : [ 0.5344 ] Appending platform config data of size :- 1628
20:24:11 INFO : Flash Jetson TX2 : [ 0.5344 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.5344 ] Updating mb1-bct with firmware information
20:24:11 INFO : Flash Jetson TX2 : [ 0.5359 ] tegrabct_v2 --chip 0x18 --mb1bct mb1_bct_MB1.bct --updatefwinfo flash.xml.bin
20:24:11 INFO : Flash Jetson TX2 : [ 0.5373 ] MB1-BCT version: 0xf
20:24:11 INFO : Flash Jetson TX2 : [ 0.5381 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.5381 ] Updating mb1-bct with storage information
20:24:11 INFO : Flash Jetson TX2 : [ 0.5391 ] tegrabct_v2 --chip 0x18 --mb1bct mb1_bct_MB1.bct --updatestorageinfo flash.xml.bin
20:24:11 INFO : Flash Jetson TX2 : [ 0.5403 ] MB1-BCT version: 0xf
20:24:11 INFO : Flash Jetson TX2 : [ 0.5410 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.5421 ] tegrahost_v2 --chip 0x18 --align mb1_bct_MB1.bct
20:24:11 INFO : Flash Jetson TX2 : [ 0.5433 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.5444 ] tegrahost_v2 --appendsigheader mb1_bct_MB1.bct zerosbk
20:24:11 INFO : Flash Jetson TX2 : [ 0.5457 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.5471 ] tegrasign_v2 --key None --list mb1_bct_MB1_sigheader.bct_list.xml
20:24:11 INFO : Flash Jetson TX2 : [ 0.5483 ] Assuming zero filled SBK key
20:24:11 INFO : Flash Jetson TX2 : [ 0.5516 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.5533 ] tegrahost_v2 --updatesigheader mb1_bct_MB1_sigheader.bct.encrypt mb1_bct_MB1_sigheader.bct.hash zerosbk
20:24:11 INFO : Flash Jetson TX2 : [ 0.5549 ]
20:24:11 INFO : Flash Jetson TX2 : [ 0.5550 ] Copying signatures
20:24:11 INFO : Flash Jetson TX2 : [ 0.5565 ] tegrahost_v2 --chip 0x18 0 --partitionlayout flash.xml.bin --updatesig images_list_signed.xml
20:24:16 INFO : Flash Jetson TX2 : [ 0.6017 ]
20:24:16 INFO : Flash Jetson TX2 : [ 0.6017 ] Boot Rom communication
20:24:16 INFO : Flash Jetson TX2 : [ 0.6033 ] tegrarcm_v2 --chip 0x18 0 --rcm rcm_list_signed.xml
20:24:17 INFO : Flash Jetson TX2 : [ 0.6049 ] BootRom is not running
20:24:17 INFO : Flash Jetson TX2 : [ 5.7341 ]
20:24:17 INFO : Flash Jetson TX2 : [ 6.7373 ] tegrarcm_v2 --isapplet
20:24:18 INFO : Flash Jetson TX2 : [ 6.7391 ] Applet version 01.00.0000
20:24:18 INFO : Flash Jetson TX2 : [ 6.8314 ]
20:24:18 INFO : Flash Jetson TX2 : [ 6.8315 ] Sending BCTs
20:24:18 INFO : Flash Jetson TX2 : [ 6.8334 ] tegrarcm_v2 --download bct_bootrom br_bct_BR.bct --download bct_mb1 mb1_bct_MB1_sigheader.bct.encrypt
20:24:18 INFO : Flash Jetson TX2 : [ 6.8357 ] Applet version 01.00.0000
20:24:18 INFO : Flash Jetson TX2 : [ 6.9669 ] Sending bct_bootrom
20:24:18 INFO : Flash Jetson TX2 : [ 6.9672 ] [...] 100%
20:24:18 INFO : Flash Jetson TX2 : [ 6.9688 ] Sending bct_mb1
20:24:18 INFO : Flash Jetson TX2 : [ 6.9695 ] [...] 100%

What is the issue?? i have flashed couple of times.

ak-nv · August 30, 2019, 11:34pm

Hi vishal.purohit,

Are you using VM?
If No, following link might be helpful. The link discusses Xavier, but try to perform similar steps.

[url]Error when install Jetson Software with SDK Manager - Jetson AGX Xavier - NVIDIA Developer Forums

Let me know if that works for you.

vishal.purohit · August 31, 2019, 2:46am

I flashed another jetson tx2 from the same PC and it works but the error is given by only this jetson TX2.
if python- as it is mentioned in the link you provided - was the problem then it should be problem for all the jetson TX2 that is flashed from that system. But, that is not the case.

linuxdev · August 31, 2019, 5:45pm

There is one issue with an Ubuntu 18.04 host whereby as a default only the newer Python3 is installed. You may wish to also install the older Python2, plus I know of a couple of other things which will be needed:

sudo apt update
sudo apt --fix-broken install
sudo apt-get install libgconf-2-4 libcanberra-gtk-module
sudo apt-get install python

omidhalimimilani · March 15, 2021, 1:28pm

I am using a Virtual machine(Ubuntu 16.04, RAM 9, Storage 60G). My jetson TX2 does not work. When I run it, I end up on some black page that I can not do anything(probably the essential files are deleted).
I do try the flashing. The lsusb command shows that Jetson TX2 is connected.
I got the following errors.

linuxdev · March 15, 2021, 3:57pm

There is no official support for a VM. VMs need extra setup, and that is more the real of the VM software support since NVIDIA has no control over that. However, people do make this work, and I’ll comment on some of the issues which might be correctible.

First and foremost, during actual flash USB will repeatedly disconnect and reconnect. Unless the VM has 100% access to this, even when rapidly disconnecting and reconnecting, the VM will fail. It seems that most VMs find the Jetson at the start, but during flash it loses USB, followed not being able to regain ownership of the USB when it reconnects (you’d have to make sure the parent o/s always gives USB to the guest o/s).

Networking is also used, though not usually as much of a problem as recovery mode USB issues; once actual flash completes the Jetson will reboot and need first boot account setup completed. Following this the VM will need both internet access and access to the Jetson via ethernet (flash does not use networking, but optional package installations only start after the Jetson is fully booted and accessible via ssh). The default ethernet is the virtual wired ethernet on the same micro-B USB cable. If the VM does not see this, or if the VM does not allow this virtual wired ethernet, then flash would have succeeded, but optional package installations would fail. Make sure ethernet via the micro-B USB is set up to be allowed, along with the VM having internet access.

omidhalimimilani · March 15, 2021, 4:27pm

Whenever it fails. I try to start again, it uses my disk spaces again(for something that is already downloaded and installed on my host virtual machine. How can I remove them to make space. Because now, I am getting the message that the disk is not enough!! Even though at the beginning it was 60G free!

linuxdev · March 15, 2021, 4:32pm

Just to be certain, you can find the free space via this command (and it should be type ext4):
df -H -T ~/nvidia/nvidia_sdk/JetPack...version.../Linux_for_Tegra/
(place the correct “version” in the command)

Technically, and practically, if there is 50GB free at that location, then it should work. If you merely have a 60GB partition, then the operating system itself will consume enough to drop below 50GB. It may be necessary to increase the space available to the VM if this is not met, but if you really have 60GB, then something else is wrong.

omidhalimimilani · March 15, 2021, 4:51pm

Every time, the sdkmanager failed to flash I tried from scratch and it uses my disk space(Please note that the actual size was 2G at the beginning. Now it is 42.63G after several tries of sdkmanager and …)

I just manually delete the nvidia file. But the problem remains the same.

linuxdev · March 15, 2021, 4:55pm

You could try to first delete these (make very sure to use the “~” to get to your user’s correct home directory…the “echo” is just so you can verify first that this is your regular user):

echo ~
rm -Rf ~/.nvsdkm
rm -Rf ~/nvidia/nvidia_sdkm

…then try again. There are some downloads in “~/Downloads/nvidia/sdkm_downloads/”, and these too could be deleted. However, if they are the correct files, then you’d just end up downloading them again (some of them are fairly large).

I will still suggest that a native (non-VM) Ubuntu host PC would work better.

omidhalimimilani · March 17, 2021, 2:42am

By using the idea of installing Linux as a host without a virtual machine, I could able to go through the steps and fix my broken Jetson TX2 and flash OS to it. (thanks to @linuxdev ).
However, I run into a new problem.
While the sdkmanager tries to install “jetson SDK components” can not be installed successfully. The error is “Error in local apt settings”.
I tried to update, upgrade, and fix all apt and apt-get in my host machine, but I receive the same error over and over again. What can I do?

linuxdev · March 17, 2021, 7:25pm

Full logs would help since it is hard to know what was going on before this shows up. The biggest question is this: Was the package install for the host PC, or was it instead for the Jetson?

Do keep in mind that you can uncheck flash and skip flashing, and simply go straight to package installs. In that case you would not use recovery mode on the Jetson.

An important detail to know before evaluating package install to the Jetson is: From the host PC, can you ssh to the Jetson account you set up from first boot? Similarly, if the package install is to the PC, does the PC have access to the internet (are firewalls or proxy involved)?

omidhalimimilani · March 17, 2021, 8:42pm

14:57:06 ERROR: File System and OS: qemu: Unsupported syscall: 278

14:57:12 ERROR: Could not detect NVIDIA Jetson device connected to USB. Verify that: 1. The device is connected to this host machine with a USB cable. 2. Jetson’s Ubuntu OS is up and running. 3. Ubuntu ‘System configuration wizard’ is completed on the device. This can be validated by running the ‘lsusb’ command on your host, and look for “0955:7c18” (NVIDIA Corp).

14:57:12 ERROR: Could not detect NVIDIA Jetson device connected to USB. Verify that: 1. The device is connected to this host machine with a USB cable. 2. Jetson’s Ubuntu OS is up and running. 3. Ubuntu ‘System configuration wizard’ is completed on the device. This can be validated by running the ‘lsusb’ command on your host, and look for “0955:7c18” (NVIDIA Corp). Or use the ‘Manual Setup’ instead.

15:02:53 ERROR: Flash Jetson TX2: Board ID(3310) version(D01) sku(1000) revision(B.0)

15:02:53 ERROR: Flash Jetson TX2: 1+0 records in

15:02:54 ERROR: Flash Jetson TX2: 30402 blocks

15:02:58 ERROR: Flash Jetson TX2: 65753 blocks

15:02:59 ERROR: Flash Jetson TX2: 20+0 records in

15:17:31 ERROR: command terminated with error

15:17:32 ERROR: command terminated with error

15:17:33 ERROR: command terminated with error

15:17:34 ERROR: command terminated with error

15:17:35 ERROR: command terminated with error

15:19:34 ERROR: CUDA Toolkit for L4T: E: Unable to correct problems, you have held broken packages.

15:19:34 ERROR: CUDA Toolkit for L4T: Unhandled error when running sudo apt-get -y install cuda-toolkit-10-2

15:19:34 ERROR: CUDA Toolkit for L4T: [error]: dpkg install on target failed; [exec_command]: safe_apt_install “sudo dpkg -i /opt/nvidia/deb_repos/cuda-repo-l4t-10-2-local-10.2.89_1.0-1_arm64.deb” 5; sleep 5; ; safe_apt_install "sudo apt-get -y install cuda-toolkit-10-2 " 5; safe_apt_install “sudo apt-get purge -y cuda-repo-l4t-10-2-local-10.2.89” 5; [deb_path]: /home/omid/Desktop/1/cuda-repo-l4t-10-2-local-10.2.89_1.0-1_arm64.deb

15:19:34 ERROR: CUDA Toolkit for L4T: command terminated with error

15:20:36 ERROR: OpenCV on Target: E: Unable to locate package libtbb2

15:20:36 ERROR: OpenCV on Target: E: Unable to locate package libtbb-dev

15:20:36 ERROR: OpenCV on Target: Unhandled error when running sudo apt-get install -y libtbb2 libtbb-dev

15:20:36 ERROR: OpenCV on Target: [error]: : [exec_command]: /bin/bash -c scp -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no /tmp/tmp_NV_L4T_OPENCV_TARGET_POST_INSTALL_COMP.sh j2@192.168.55.1:~; ssh -t -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no j2@192.168.55.1 “set -o pipefail; ~/tmp_NV_L4T_OPENCV_TARGET_POST_INSTALL_COMP.sh | sed ‘s/^/SDKM_INSTALL_ERROR /’ && rm -f ~/tmp_NV_L4T_OPENCV_TARGET_POST_INSTALL_COMP.sh”; [error]:

15:20:36 ERROR: OpenCV on Target: command terminated with error

INSTALLATION FAILED
Please review the terminal tab for details. Resolve and RETRY.

EXPORT LOGS

RETRY

FAILED ITEMS

STOP TRYING

ssh is fine!
The host is connected to the router(with wired lan ethernet and also wifi). I check each individually as well.

linuxdev · March 17, 2021, 8:53pm

A missing syscall tends to imply the kernel is missing a configured feature. In QEMU this might imply something talking to the kernel needing configuration, versus the actual host PC missing something.

I don’t remember all details, but if QEMU install order changed (perhaps from something else installing QEMU for another architecture), then this might cause such an error. I have an old note here which probably applies, but I have to apologize that this is from so long ago that I don’t remember all of the details:
“Install binfmt-support prior to qemu-user-static. If not, then after it all gets installed, run “sudo dpkg-reconfigure qemu-user-static” once.”

Can you try “sudo dpkg-reconfigure qemu-user-static”, and then try install again?