I’d like to continue my discussion of a thread that was closed due to me being out of office and unable to reply to the thread for about a week.
This is the link to the prevoious thread
I am attempting to flash JetPack 4.6 to my production Xavier NX module (16gb EMMC module) connected to the nVidia Xavier NX devkit. I am trying to flash to the NVMe SSD connected to the devkit. The module had JetPack 4.6 on it from an earlier flash and I was able to use my HDMI monitor just fine, however I recently reflashed my module and I am unable to load any GUI.
My UART is able to see the login prompt and I am able to SSH into the computer as well.
I have attached the following files:
- logs from initrd flashing as flash_1-4_0_20220811-095302.log
- logs from UART from devkit after flashing is completed showing boot-up as xavier_301_success_postflash.log
- syslogs after completing oem_config as syslog_noGUI.log
- /var/log/Xorg.0.log
syslog_noGUI.log (204.1 KB)
flash_1-4_0_20220811-095302.log (21.3 KB)
xavier_301_success_postflash.log (40.0 KB)
Xorg.0.log (10.9 KB)
Please let me know what next steps I should take.