I have the official Orin Nano dev-kit with JetPack 6.0 PR installed. The Hello AI project installed properly, I am able to toggle the GPIO pins with C++ code, and the UART serial communication streams data to other devices flawlessly. However, my Raspberry Pi V2 camera connected to the CAM0 CSI po…

Great news, the camera works. The solution is this: make sure the ubuntu kernel (r36.3) is consistent with the firmware in the orin nano dev-kit (now r36.3). I enabled the camera with the “/opt/nvidia/jetson-io/jetson-io.py” script, and the dev-kit booted to completion this time - the enabling ste…

Please enable the camera by jetson-io first. Then check the kernel for the driver loading. sudo dmesg | grep -i imx219

Big problem after trying to enable the camera - Orin Nano dev-kit will no longer boot beyond the Nvidia splash screen. The steps I followed to enable the camera are summarized at Arducam . I basically used the “/opt/nvidia/jetson-io/jetson-io.py” script. After the splash screen comes up, the ubunt…

Looks like unable load the file system. Could you reflash the system by sdkmanager to run the jetson-io to try again.

The Jetpack 6.0 PR is installed via an SD card. Are you saying I have to re-image the card? I have many projects created and saved information, and a lot of time invested in the current SD card. Is it possible to repair or undo the jetson.io steps using the serial console to save it? I’m able t…

L4TLauncher: Attempting Recovery Boot EFI stub: Booting Linux Kernel... The boot stuck in recovery boot. Please read this post. [image] Problem boot Xavier-nx not found root file system after long time using device Jetson Xavier NX @chudat1204 What we care is only why t…

I read the post, but not very helpful. I think what you and ShaneCCC are suggesting is to re-flash my Orin Nano official dev-kit (currently has Jetpack 6.0 PR). But this is a major problem because I will lose many projects and libraries. Just to be clear, are you implying there is no way to undo …

Hi, No, that is not what I mean. The point here is not reflash the board. The point here is you need to recover current situation from recovery image by using the method I shared in above post. It is just that user’s jetpack version is too old to do this recovery, so he can only reflash the boar…

The logic here Your did something and lead to system crash The board fails to boot into kernel for consecutive 3 times because the crash in (1). The board will go into recovery image/recovery boot to prevent your board keep rebooting in (2). We only care about the error log from (1), but…

Great, some success, I got the dev-kit to boot successfully. But not out of the woods yet. I followed these steps to make a direct boot from my serial console: Press ESC to enter UEFI Menu, then choose Device Manager → NVIDIA Configuration → L4T Configuration → OS chain A status → (The value is U…

Hi, Just to clarify. What is the exact “same problem” you are talking about? Are you saying that this is the error you hit? ASSERT [L4TLauncher] /out/nvidia/bootloader/uefi/Jetson_RELEASE/edk2-nvidia/Silicon/NVIDIA/Library/TegraDeviceTreeOverlayLib/TegraDeviceTreeKernelOverlayLib.c(48): ((BOOLE…

Orin Nano Dev-Kit with JetPack 6.0 PR Not Detecting CSI Camera

Robotics & Edge Computing Jetson Systems Jetson Orin Nano

WayneWWW September 19, 2024, 7:46am 8

L4TLauncher: Attempting Recovery Boot
EFI stub: Booting Linux Kernel...

The boot stuck in recovery boot. Please read this post.

Topic		Replies	Views
Jetpack 6.0 - issues with soc csi2 camera Jetson Orin Nano camera	37	923	August 23, 2024
How to enable CSI0? Jetson Orin Nano camera	81	967	June 12, 2026
New QSPI Bootloaders for Orin Nano and Jetpack 6.0 DP Jetson Orin Nano boot	16	3722	January 2, 2024
Problem with reading SD card with the Jetpack 6.1 rev 1 image to start Nano Orin Jetson Orin Nano boot	28	932	January 28, 2025
CSI Camera 0 Hangs When Trying to Collect an Image with v4l2-ctl Jetson Orin Nano camera	23	1657	September 25, 2023
Nvidia Jetson Orin nano devkit not booting after some time, reflash doesn't help Jetson Orin Nano boot	15	1378	October 20, 2023
Jetson Orin Nano does not boot after flashing Jetpack 6 Jetson Orin Nano sdkm , boot	28	4555	December 20, 2023
Camera does not work as expected with Orin Nano Jetson Orin Nano camera	32	3063	June 9, 2023
JetPack 6.1 L4T36.4 Camera not working on jetson orin nano/nx devkit Jetson Orin Nano camera	22	779	November 21, 2024
No image capture from camera via FPD Link for Orin nano R36.3 module Jetson Orin Nano camera	36	1050	February 5, 2025

Orin Nano Dev-Kit with JetPack 6.0 PR Not Detecting CSI Camera

Related topics