Hi all, We are using TX2 r28.1. We use the usb lane mapping #3. Two INTEL® 82574L GIGABIT ETHERNET CONTROLLERLs are connected to the two PCIE x1. I can successfully see with lspci -nn 00:02.0 PCI bridge [0604]: NVIDIA Corporation Device [10de:10e6] (rev a1) 00:03.0 PCI bridge [0604]: NVIDIA Corpo…

FYI, those parameters should be picked up on kernel command line. If you see this, then I’d expect the problem isn’t software (it could be, I’d be more suspicious of signal quality): type=Physical Layer

PCIe Bus Error, AER: Multiple Corrected error received on tx2 r28.1

Autonomous Machines Jetson & Embedded Systems Jetson TX2

Honey_Patouceul May 31, 2021, 1:25am 10

You may check these links.

1 Like

Topic		Replies	Views
PEX0 won't work, when using usb lane mapping config #3 Jetson TX2	10	1146	October 18, 2021
About TX2 display and kernel command line Jetson TX2	8	1198	January 3, 2019
M.2 2280 NVME via PCIe ( PCIE: no end points detected) Jetson TX2	12	1873	March 21, 2018
Some problem about tc358748 on jetson-tx2 Jetson TX2	2	1329	January 18, 2018
Tx2 wifi/Bluetooth Device Tree issue Jetson TX2 boot , kernel	8	729	October 18, 2021
on board wifi trouble with new R32.3.1 (Jetpack 4.3) Jetson TX2	21	1384	October 18, 2021
Tx2 does not recognize pcie Jetson TX2	3	689	October 18, 2021
PCIe failed to assign memory space Jetson TX2	9	6694	October 18, 2021
configure EDP(DP0) failed Jetson TX2	4	973	October 18, 2021
Mapping relationship between I2C_GP2 and device node in tx2 Jetson TX2	5	1030	October 18, 2021

PCIe Bus Error, AER: Multiple Corrected error received on tx2 r28.1

Related topics