I am trying to monitor power consumption of jetson nano using TEGRASTATS.I want to know what exactly is shown in tegrastats specilly POM_5V_IN,POM_5V_GPU and POM_5V_CPU.I also want to know what Integrated power consumption monitoring tool is used on jetson nano. RAM 1698/3965MB (lfb 99x4MB) CPU [16…

Hi thohtdelta, Please refer to the details in [url] Welcome — Jetson Linux<br/>Developer Guide 34.1 documentation Thanks

<VDD_name> X/Y <VDD_name> is power consumption (mW) for certain module “name”'s rail. X is current value and Y is average value. This is same for POM_5V_name.

Thanks kayccc I tried to save the data from tegrastats and ended up saving the whole line. It will be helpful if i can only save the power and temperature,please tell me where do tegrastats take those values from(like a file?),if so tell me the path.

Hi thohtdelta, Install the strace package: apt install strace Output used files: strace tegrastats 2>&1 | grep openat | grep sys You will get something like that: … openat(AT_FDCWD, “/sys/bus/i2c/devices/6-0040/iio_device/rail_name_0”, O_RDONLY) = 4 openat(AT_FDCWD, “/sys/bus/i2c/devices/6-004…

That was helpful @fedormelexin , I also wanted to know one more thing https://docs.nvidia.com/jetson/l4t/index.html#page/Tegra%2520Linux%2520Driver%2520Package%2520Development%2520Guide%2FAppendixTegraStats.html%23wwpID0E0SB0HA After checking this link i am still confused whether POM_5V_IN is the …

I do not know which option is correct. Supply 4 Amps at 5 Volts through the Barrel Jack connector is 5V*4A = 20 Watts (MAX). 13 watts seems to be acceptable consumption. With sufficient cooling, the runs for a long time should not affect the board.

Just an observation: Jetson Nano without any peripherals with full CPU (no GPU) load seems to consume aroung 4.5W. [image]

@nanom Could you please share what monitoring tool/setup do you use on your screenshot?

Not sure, but it might be jtop: [image] jtop 📊 Simple package for monitoring and control your NVIDIA Jetson [Orin, Xavier, Nano, TX] series - rbonghi/jetson_stats

Power consumption monitoring

Robotics & Edge Computing Jetson Systems Jetson Nano

dusty_nv April 29, 2019, 2:44pm 8

POM_5V_IN measures the overall 5V input to the board, it represents the total power consumption. You don’t need to add POM_5V_GPU and POM_5V_CPU to it. The GPU/CPU rails are provided for extra reference.

Topic		Replies	Views
Hardware used for Tegrastats? Jetson Nano	1	562	February 20, 2020
POM_5V_IN Jetson Nano 2GB Jetson Nano power , nano2gb	5	1107	November 9, 2021
Read power consumption of nano? Jetson Nano power	7	8251	March 26, 2021
Power Consumption measurement during training Jetson Nano power , machine-learning	3	258	July 8, 2025
Tegrastats' time interval for calculation of average power consumption Jetson Nano	3	835	May 25, 2020
Tegrastats doesn't display power usage for the Jetson nano 2g, Jetson Nano power , nano2gb	2	1169	December 14, 2020
Tegrastats monitoring Jetson AGX Orin power , monitoring	2	3371	June 22, 2022
How to measure power consumption for given task Jetson Nano	1	1141	March 2, 2020
GPU power consumption from tegrastats utility Jetson Orin Nano cuda , power_estimator	1	440	April 19, 2024
Measure Current Drawing by Jestson Nano Jetson Nano power	3	749	March 1, 2023

Power consumption monitoring

Related topics