Dear Team,
We designed the custom carrier board with help of Jeton Xaveir AGX SOM
and
we need to test the I2C and SPI ,
Instead of using any external i2c ,SPI or any MCU Chip.
Is that possible to connect 2 custom carrier each other like 1 custom carrier set as Master and another custom carrier board slave ?
like similar to SPI also.
Requesting you to help us.
Thanks,
Pooja Ak
Have reference to below topic for i2c slave mode.
Has anybody got the TX2 operating as a slave on I2C bus?
I see in the documentation that it is possible.
I’ve got it working ok as master:
int i2cwrite(int writeValue)
{
int toReturn = i2c_smbus_write_byte(kI2CFileDescriptor, writeValue);
if (toReturn < 0)
{
printf(" ************ Write error ************* \n") ;
toReturn = -1 ;
}
return toReturn ;
}
… and can send bounding box coordinates etc to an MCU, but what if the MCU, such as the Infineon TC275, will only work as ma…
system
Closed
December 7, 2022, 5:31am
5
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.