Trying to get SPI2 working on Jetson NANO Production Module

[busch.johannes]

It is working now.
I had to apply the patch from above, then the gpio pins were configured correctly and spi loopback test is working.

SPI0 doesn't work on Jetson Nano with eMMC, but does work on Jetson Nano with SD Card

Have a try below patch and below to dts to check the tegra_gpio status. default { gpio-hog; function; gpios = <0x10 0x0 0x11 0x0 0x12 0x0 0x13 00 0x14 0x0>; };

Best regards,
Johannes