I tested the bup upgrade of the current system and found that it failed After the system is powered on, run the following command to check the system nvbootctrl dump-slots-info [image] I place the BUP file in the target system under this directory before the Update Engine is run: /opt/ota_pack…

because you have to create update_list.conf by yourself, and please edit it to add the names and slots of the partition(s) to be updated.

Tx2 l4t 32.5.1 bup fail!

JerryChang November 24, 2022, 5:19am 23

hello easyzoom,

yes, that’s not supported.

easyzoom November 30, 2022, 7:32am 25

hello JerryChang,

Thanks for you

Topic		Replies	Views
nv_update_engine not updating from R32.2 to R32.2.1 Jetson TX2	9	1128	January 30, 2020
Bootloader OTA update is not updating uboot sometimes on jetson Tx2 SDK 32.4.3 Jetson TX2 ota	17	1466	July 7, 2021
Bup update faile on L4T R32.7.3 Jetson Nano boot	21	1063	February 7, 2023
OTA upgrade Error with TX2 Jetson TX2 nvbugs , ota	15	2211	December 14, 2021
a/b slots in TX2 Bootloader Update and Redundancy. Jetson TX2	6	1060	March 16, 2020
Is it possible to directly update BUP built from L4T 32.7.3 based on L4T 32.5.1? Jetson Nano boot , board-design	3	709	March 14, 2023
如何通过BUP升级A_bpmp-fw-dtb分区？ Jetson Orin Nano board-design , ota , chinese , bootloader	15	315	February 12, 2025
Jetson Xavier NX Update and Redundancy Jetson Xavier NX ota	4	714	April 29, 2021
L4t_generate_soc_bup.sh failure Jetson TX2 ota	1	722	August 19, 2022
Error in nv_update_engine: Can't find matching TN Spec in OTA Blob! Jetson AGX Xavier kernel , nvbugs	7	916	February 26, 2021