TX2 NX M.2 to PCIe mSATA SSD

Autonomous Machines Jetson & Embedded Systems Jetson TX2
1

I’m am trying to configure the Jetson TX2 NX to have additional external storage via the M.2 connection. So far I have not been able to see the connected SSD.

I have the following setup:

Running lspci returns nothing. I’m sure that I’m missing something key to making this work … or maybe it’s not possible?

Any help would be most appreciated, thanks!

2

Hi,
Could you try NVMe SSD driver like:
https://www.amazon.com/NVMe-SSD/s?k=NVMe+SSD

We have guidance in developer guide for flashing rootfs to NVMe SSD. Please take a look and try. mSATA SSD is not tested so it may not work properly. It is better to use NVMe SSD.

3

Thank you @DaneLLL for the quick reply. I have a nvme ssd on order.

4

For anyone else wanting to add nvme (not mSATA) storage to their Jetson dev board via the M.2 connection, here’s what worked for me:

5

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.