Jetson NX board to operate as a (PCIe/M.2) NVMe storage controller

[gentijo1]

Hi all,

I would like to have a Jetson board, preferable using the NX connector, present as an NVME storage controller. So either have a m.2 card with an NS connector on it to mount the board, or a PCIe style board that does the same. Is there anything out there already or any documentation on how to wire the NX connector to an M.2 connector ?

iI am trying to achieve something like the NiteFury controller board but instead of a FPGA/1GB ram, have a Orin/CUDA board with 32GB of ram.

Nitefury, Xilinx Artix FPGA kit in

Thanks
John

[Trumany]

Hi, please check with the vendors in Jeston Ecosystem for such requests.