Unsupported board ID

Autonomous Machines Jetson & Embedded Systems Jetson Xavier NX
1

After entering sudo apt upgrade i get the error shown below:

Setting up nvidia-l4t-bootloader (32.4.4-20201027211332) …

ERROR. Unsupported board ID: .
Cannot install bootloader package. Exiting…
dpkg: error processing package nvidia-l4t-bootloader (–configure):
installed nvidia-l4t-bootloader package post-installation script subprocess returned error exit status 1
Errors were encountered while processing:
nvidia-l4t-bootloader
E: Sub-process /usr/bin/dpkg returned an error code (1)

I am using a Photon ConnectTech carrier board with NX production module and their r34.4.3 board service pack… Jetpack 4.4 is loaded on the SD card. I flashed it from a native ubunutu host using this command sudo ./flash.sh cti/Xavier-NX/photon external following this procedure https://connecttech.com/resource-center/kdb377-booting-off-external-media-cti-jetson-carriers/

2

Hi Alex15 -

It looks like our Tech Support team is helping you work through this. If you have any additional questions, please don’t hesitate to reach out to support@connecttech.com.

Thanks!
Jacki

3

Hi @jross, thank you, yes. As per your team’s recommendation, I have moved back to 4.4.1 and set the maximum partitian size to zero (rather than the maximum). Thankfully, that appears to have resolved the issue for me but I’ve asked my engineer to double-check tomorrow. If the issue remains, I’ll let you know. Cheers