Describe the bug we are configuring ”nvme over rdma“. We can use nvme discover to discover remote nvme normally. But when use nvme connect,we met an error. by using linux command dmesg, get information [5365309.262528]mlx5_cmd_check:810:(pid 923941): create_mkey(0x200) op_mod(0x0) failed, status…

When use nvme connect,we met an issue “mlx5_cmd_check:810:(pid 923941): create_mkey(0x200) op_mod(0x0)

347895316 November 22, 2023, 3:22pm 9

I configured according to the official url, but I encountered the same problem and could not solve it. Do you know how to solve it

Topic		Replies	Views
When use nvme connect,we met an issue “mlx5_cmd_check:810:(pid 923941): create_mkey(0x200) op_mod(0x0) failed Mellanox OFED nvme-over-fabrics	1	634	August 8, 2024
Not able to run Open Fabic nvm cli with Mellanox OFED stack Ethernet Adapter Cards	1	309	April 12, 2017
Hello, little pb with nvme-cli. On client I try the command sudo sh -c 'nvme discover -t rdma -a 192.168.20.10 -s 4420' but it returns: Failed to write to /dev/nvme-fabrics: Argument invalide Software And Drivers port , sudo	1	587	March 15, 2020
Unknown symbol nvme_find_pdev_from_bdev Mellanox OFED	1	919	February 21, 2019
Trying to run NVMe over IB client. Installed OFED 5.1-2.5.8.0 on RHEL 8.3 kernel 4.18.0-240.el8.x86_64 using "./mlnxofedinstall --with-nvmf --add-kernel-support" command. Failed to load nvme-rdma driver, getting a bunch of -22 errors in dmesg. Mellanox OFED	1	607	December 28, 2020
Issue observed while inserting 'nvme_rdma' module after OFED driver installation. Software And Drivers	3	2323	December 3, 2019
MLNX_OFED_LINUX installtion Error: Error: The current MLNX_OFED_LINUX is intended for rhel6.4 Mellanox OFED ibv_devices	12	2589	January 13, 2014
ibv_reg_mr got file exists error when used nv_peer_mem	2	523	September 9, 2017
random write failing with 100G connect 4x card Ethernet Adapter Cards	7	556	July 9, 2017
After install MLNX_OFED with '--with-nvmf', can't issue SCSI command to NVMe Software And Drivers	5	404	August 14, 2020