Xavier agx Industrial Lan7800 connection issue

Robotics & Edge Computing Jetson Systems Jetson Nano
,
1

we create costom Xavier agx Industrial carier and we connected 4 lan7800 to it. when we connected lan7800 to usb2 it works . but when we connected it to usb3.1 it dont work. when i connect an ethernet to my pc from lan7800 xavier agx, my pc’s ethernet port turns up but xavier side still down . (kernel version : 5.10.120-tegra)
it is dmesg output:
[ 9479.049143] usbcore: deregistering interface driver lan78xx
[ 9509.785147] lan78xx 2-1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed
[ 9510.153491] lan78xx 2-1.2:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed
[ 9510.505409] lan78xx 2-1.3:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed
[ 9510.864052] lan78xx 2-1.4:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed
[ 9510.935316] usbcore: registered new interface driver lan78xx
[10711.452621] usbcore: deregistering interface driver lan78xx
[10715.275949] lan78xx 2-1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed
[10715.647696] lan78xx 2-1.2:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed
[10715.755975] FAN rising trip_level:1 cur_temp:50000 trip_temps[2]:63000
[10716.048955] lan78xx 2-1.3:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed
[10716.408988] lan78xx 2-1.4:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed
[10716.478592] usbcore: registered new interface driver lan78xx

3

This looks like vendor driver level error but the error log seems not fatal too. Better asking the vendor.