Hi, I have Xavier which boots from emmc and an external SSD which is used for storing datas. When the SSD is not connected to Xavier, it boots normally. But when I connect the SSD to xavier and power on, Xavier tries to boot from SSD which is not a valid boot partition so it halts forever on bootin…

You can test whether the new cbo.dtb has been flashed & picked up by CBoot by stopping at the CBoot console (press any key during boot) and typing: printvar boot-order That should display the boot-order CBoot is using. I would guess that you haven’t updated the CBO partition correctly if you still…

Xavier Change Boot Order

Robotics & Edge Computing Jetson & Embedded Systems Jetson AGX Xavier

WayneWWW August 17, 2020, 2:37am 7

The boot order configuration here is more like a old method when cboot cannot support extlinux.

I believe this has not been verified for quite time. Let us check this internally.

Thanks for your patience.

Topic		Replies	Views
Change boot order on Xavier NX without FS rewrite Jetson Xavier NX boot	5	956	July 13, 2022
Internal Boot Issue with External SSD Installed Jetson AGX Xavier boot	12	501	August 14, 2023
Boot device order Jetson AGX Xavier	4	989	October 18, 2021
Jetson Xavier NX, External Boot(SSD or sd card), Changing Boot order from emmc to external Jetson Xavier NX boot	14	2449	February 18, 2022
Set boot sequence for Xavier NX Jetson Xavier NX boot	9	5410	October 18, 2021
I re-flashed my jetson nx board (emmc version), but it still boot directly from my 1TB ssd Jetson Xavier NX boot	10	511	September 7, 2022
Cbo.dtb not getting flashed with JetPack 4.3 Jetson AGX Xavier device-tree	11	1493	October 18, 2021
Using Sata Disk To Boot \| Jetpack 4.6 rev2 Jetson Xavier NX boot , sata	4	1362	November 9, 2021
Can't boot up Xavier NX when a NVME SSD is inserted Jetson Xavier NX boot	11	726	November 3, 2022
Modify boot order Jetson AGX Xavier boot	11	845	August 1, 2023

Xavier Change Boot Order

Related topics