About raw16

I have an image of raw16, how can I configure it to receive it.
i try to configure it in dts
csi_pixel_bit_depth = “16”;

But it will be printed in dmesg
extract_pixel_format: Need to extend formatbayer_rggb16
[ 40.190470]Unsupported pixel format

what should i do

Current don’t support pure raw 16 but PWL 16bits.
For pure raw can support RAW8/RAW10/RAW12/RAW14.


but according to the manual provided by official ,raw16 is supported

Yes the chip design support it but driver didn’t support it.


So, do I have any methods

Yes, current don’t support.