Anyone has MBF2M345A-VENOT_ES_Ax firmware?

Device #1:

Device Type: BlueField2
Part Number: MBF2M345A-VENOT_ES_Ax
Description: NVIDIA BlueField-2 E-Series Eng. sample DPU; 200GbE single-port QSFP56; PCIe Gen4 x16; Secure Boot Disabled; Crypto Enabled; 16GB on-board DDR; 1GbE OOB management
PSID: MT_0000000809
PCI Device Name: 0000:02:00.0
Base GUID: b8cef60300f66576
Base MAC: b8cef6f66576
Versions: Current Available
FW 24.31.0356 N/A
PXE 3.6.0401 N/A
UEFI 14.24.0013 N/A
UEFI Virtio blk 22.1.0011 N/A
UEFI Virtio net 21.1.0011 N/A

Status: No matching image found

This BF2 ES version cannot see CX6-DX in linux or windows.

I think this is firmware problem.

Anyone has new version for this DPU?


Hello there!

Thank you so much for reaching out to us with your question.

Based on the information you’ve provided, it appears that the adapter in question is an Engineering Sample (MBF2M345A-VENOT_ES_Ax). It’s important to note that we do not create new firmware updates for adapters that are engineering samples.

However, we recommend getting in touch with the supplier of the adapter to inquire further. They should be able to provide you with the most appropriate guidance or solution for your situation.

Warm regards,


Thanks for your reply.