AQR113C firmware

[sevm89]

Dear Nvidia Team

According to the following thread

Loading Firmware for 10GbE AQR113C on bootup

On a related topic. Since the ethernet phy doesn’t have an image obviously it doesn’t work but it seems like no other internet connection works either whether using a USB Wifi dongle or a USB ethernet dongle. But the same exact Orin module on the dev board works with the off-the-shelf wifi and ethernet dongle. The is no problem with the USB port on the carrier PCB because it works for other stuff like the mouse/keyboard/webcam/etc. Is the eth0 not work cause the whole networking not to function…

it is necessary to load a firmware into the Flash of the AQR113C over the MDIO interface. We received tools and firmware files from Marvell and are able to program the flash on the DevKit of the AGX Orin. However, if we flash the generic firmware from Marvell, the 10 GbE stops working, which corresponds to the findings of the mentioned topic. There changes in registers are mentioned to make the AQR113C firmware on the DevKit working with custom carrier boards. Can you let us know which changes are necessary so we do not have to troubleshoot it?
Thank you.

Best regards

[nzamani]

Read the image from the dev board first and load it to your custom board. We spent alot of time but could not get one of the generic marvel images to work.