Camera Connector

Robotics & Edge Computing Jetson & Embedded Systems Jetson AGX Xavier
1

Hi, I have few questions about pins on Camera Connector for Xavier.

  1. What is the idea behind GPIO25_VDD_SYS_EN (pin 119) and what enables that GPIO. Enabling vdd_sys_en regulator.12 also enables GPIO25_VDD_SYS_EN. Is that the only way to enable that GPIO or is it possible to enable it in a different way? We are considering that pin for HW supply enablement.

  2. DVDD_CAM_IO_1V2 isn’t connected but is listed in Camera Connector pinout. Why is that?

Thanks!

2

Hi,

  1. Please check the pinmux sheet, it is SOC_GPIO50 pin of chip.

  2. It inherits from carrier board design of P2597 of Jetson TX2, just ignore it please.