Hi, I’m able to perform can loopback and can communication between my orin and vector canoe tool but I need to perform can wake up function. I tried to open candump in my orin and send messages from the canoe tool and put my orin board into suspend mode but it is not working. What to do ?

Hi srivathsan.p, Are you working with @pritamdinkar.waghmode ? If so, let just discuss the same issue on that topic ( CAN_WAKE in AGX Orin - Jetson & Embedded Systems / Jetson AGX Orin - NVIDIA Developer Forums )

No I’m not working with anyone

CAN_WAKE in AGX Orin

Robotics & Edge Computing Jetson Systems Jetson AGX Orin

KevinFFF April 13, 2024, 2:02pm 5

You could also refer to my reply in the following thread.
CAN_WAKE in AGX Orin - #6 by KevinFFF

Topic		Replies	Views
CAN_WAKE in AGX Orin Jetson AGX Orin can-bus	5	558	April 11, 2024
Using CAN-bus on Jetson AGX Orin Jetson AGX Orin can-bus	2	1591	June 1, 2023
I cannot recieve can msgs from a can bus using AGX Orin Jetson AGX Orin can-bus	2	97	December 4, 2024
AGX Orin dev kit CAN no signal on pins Jetson AGX Orin can-bus	3	146	February 18, 2025
Jetson Agx Orin CAN communication Jetson AGX Orin can-bus	9	1296	July 27, 2023
Jetson AGX orin can0 Jetson AGX Orin kernel , can-bus	9	325	August 3, 2024
NVIDIA® Jetson AGX Orin™ Developer Kit 64 Jetson AGX Orin can-bus	2	86	April 29, 2025
Setting up CAN Jetson AGX Orin can-bus	3	810	September 10, 2025
Orin CAN Bus can`t work Jetson AGX Orin can-bus	13	2649	August 24, 2022
How to verify the CAN0 and CAN1 of orin DRIVE AGX Orin General driveos-can	6	1998	November 16, 2022

CAN_WAKE in AGX Orin

Related topics