cdiDevCreate: failed

Autonomous Vehicles DRIVE AGX Orin DRIVE AGX Orin General
1

Please provide the following info (tick the boxes after creating this topic):
Software Version
DRIVE OS 6.0.6
DRIVE OS 6.0.5
DRIVE OS 6.0.4 (rev. 1)
[*] DRIVE OS 6.0.4 SDK
other

Target Operating System
[*] Linux
QNX
other

Hardware Platform
DRIVE AGX Orin Developer Kit (940-63710-0010-300)
DRIVE AGX Orin Developer Kit (940-63710-0010-200)
DRIVE AGX Orin Developer Kit (940-63710-0010-100)
DRIVE AGX Orin Developer Kit (940-63710-0010-D00)
DRIVE AGX Orin Developer Kit (940-63710-0010-C00)
[*] DRIVE AGX Orin Developer Kit (not sure its number)
other

SDK Manager Version
1.9.3.10904
[*] other

Host Machine Version
[*] native Ubuntu Linux 20.04 Host installed with SDK Manager
native Ubuntu Linux 20.04 Host installed with DRIVE OS Docker Containers
native Ubuntu Linux 18.04 Host installed with DRIVE OS Docker Containers
other

hi,
when I try to run the sample “nvsipl_sample”, it shows
“cdiDevCreate: Failed - add cdi dev driver /dev/cdi-dev.0.85 - Invalid argument”

how to solve this error? thanks!

3

Dear @h-wangteng,
Could you share the complete log and used camera module?

4

some of the log is added by me. the whole log is as below

nvsipl_sample: platformCfg: V1SIM728S1RU3120NB20_CPHY_x4

nvsipl_sample: csiPort 2
deser_i2cAddr 0x29
serial_i2cAddr 0x84
sensor_i2cAddr 0x6c

nvsipl_sample: SetPlatformCfg OK!

nvsipl_sample: deviceBlk_id 0 cameraModule_id 0 SetPipelineCfg OK!

cdiDevCreate: Failed - add cdi dev driver /dev/cdi-dev.0.85 - Invalid argument
nvsipl_sample: ERROR: INvSIPLCamera::Init() failed, status: 10

5

Hi @h-wangteng,
I believe @SivaRamaKrishnaNV was inquiring about the specific camera module listed as supported on the following ecosystem pages:

1 Like
7

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.