Direct firmware load for tegra18x/nvhost_nvenc061.fw failed with error -4

the system worked normally before, but now below issue reported, need help, thanks

[Wed May 25 08:13:07 2022] falcon 154c0000.nvenc: firmware, attempted to load /lib/firmware/tegra18x/nvhost_nvenc061.fw, but failed with error -4

[Wed May 25 08:13:07 2022] falcon 154c0000.nvenc: Direct firmware load for tegra18x/nvhost_nvenc061.fw failed with error -4

[Wed May 25 08:13:07 2022] falcon 154c0000.nvenc: Falling back to user helper

[Wed May 25 08:13:07 2022] falcon 154c0000.nvenc: failed to get firmware

[Wed May 25 08:13:07 2022] falcon 154c0000.nvenc: failed to get firmware

[Wed May 25 08:13:07 2022] falcon 154c0000.nvenc: nvhost_flcn_init_sw: failed

[Wed May 25 08:13:07 2022] arm-smmu 12000000.iommu: Unhandled context fault: iova=0x00000000, fsynr=0x10001, cb=19, sid=7(0x7 - NVENC), pgd=0, pud=0, pmd=0, pte=0

[Wed May 25 08:13:07 2022] (255) csr_nvencsrd: EMEM address decode error

[Wed May 25 08:13:07 2022] status = 0x2032701c; addr = 0x3ffffffc0

[Wed May 25 08:13:07 2022] secure: yes, access-type: read

[Wed May 25 08:13:07 2022] unknown mcerr fault, int_status=0x00000000, ch_int_status=0x00000200, hubc_int_status=0x00000000

[Wed May 25 08:13:07 2022] unknown mcerr fault, int_status=0x00000000, ch_int_status=0x00000200, hubc_int_status=0x00000000

[Wed May 25 08:13:07 2022] unknown mcerr fault, int_status=0x00000000, ch_int_status=0x00000200, hubc_int_status=0x00000000

[Wed May 25 08:13:07 2022] mc-err: Too many MC errors; throttling prints

Duplicted with Direct firmware load for tegra18x/nvhost_nvenc061.fw failed with error -4 - Jetson & Embedded Systems / Jetson TX2 - NVIDIA Developer Forums