Hello, I have a new Jetson Nano 2GB. I am going through the setup process, and I discovered that when I reboot, after the initial configuration, gdm3 doesn’t start, and so it boots without a display manager running. I discovered that in its initial update, gdm3 doesn’t start then either. I can start…

If you are talking about apt update let your display manager gone, please refer to this thread. This is a known issue and we have some workarounds here. [image] Jetson Nano blank screen during and after boot Jetson Nano I’ve updated my Jetson Nano a couple of…

is the xserver starting up but not letting you acess desktop functions ?

i am at this moment im experiencing similar problems i at this moment only have 3amp power supply atcced to it and have been receiving system halt mesages du to over voltage for some reason so i went ahead and updated and upgraded which took some time but after restarting it just leaves me hanging…

Hello @steid , thank you for the question. I don’t know how to answer that cleanly. I’ll add a bit more explanation. The display is working on the first startup; I configured WiFi and I did “apt upgrade” and “apt update” and I noted that ‘gdm3’ failed to start. After I do ‘sudo reboot,’ the system j…

@steid , this looks like a different problem My power supply is 3.5 A and I’ve had no issues with power at all. I ordered one of the power supplies listed by Nvidia.

if you want on desktop all you have to do is envoke a fresh terminal with the CTRL + ALT + one of the F3 keys then log in wiht your dits and just type startx if you need to have it start on every start then you msut edit the nvidia=xserver setting file and set the services intomation thoiugh i bet …

@steid , can you say a little more about the nvidia xserver settings? This is the first I have heard of it. You are right about the power-saving. what I would really like is to be able to turn it on and off - whether to start with the display on or not. Also, are you saying that I could evoke a fresh…

well this banana in my opinion is not what you think but is appearing to be what you are used to. this fine peace of tech is boasting ai fused with chipset tuning to the point past ragmatical design. there is a small bit of me inside that reckons something within the box is sat there testing your …

to edit the nvidia-xserver in terminal can leave you feeling quite aloufe with more questions rather that a solution i found someone hear. whom explains some of the points of the practice you would have to get your head around How to save the X server settings? - GPU Unix Graphics / Linux - NVIDIA…

Hello @waynewww , this is exactly the issue I’m having. Your fix of “sudo apt-mark hold systemd” does indeed work. I will explore further and post any other observations in that thread.

Display challenges when booting 2GB Jetson Nano

Robotics & Edge Computing Jetson Systems Jetson Nano

WayneWWW December 2, 2020, 2:37am 11

If you are talking about apt update let your display manager gone, please refer to this thread. This is a known issue and we have some workarounds here.

Topic		Replies	Views
Jetson nano not booting up Jetson Nano boot	6	1675	October 15, 2021
Jetson nano 2GB black screen/No display after boot Jetson Nano boot , nano2gb	12	3035	October 15, 2021
Display shuts off after booting jetson nano Jetson Nano dp-display	2	686	October 15, 2021
Jetson Nano stucks via booting Jetson Nano	5	639	October 15, 2021
Display not working Jetson Nano boot	2	1067	February 23, 2022
Jetson nano dose not start Jetson Nano boot	24	1669	May 4, 2022
Jetson Nano Dev Kit 4GB not booting with display connected, but works with ssh Jetson Nano boot	4	375	November 27, 2023
Can't boot Jetson Nano Jetson Nano boot , ubuntu , python	22	4499	October 15, 2021
Jetson nano not booting up Jetson Nano boot	8	1192	October 15, 2021
Jetson nano不接显示器的时候，断电重启存在桌面系统启动异常，概率较大 Jetson Nano kernel , chinese	11	572	October 14, 2024

Display challenges when booting 2GB Jetson Nano

Related topics