Enabling PPS on DRIVE AGX Xavier

Autonomous Vehicles DRIVE AGX Xavier DRIVE AGX Xavier General
1

Please provide the following info (check/uncheck the boxes after creating this topic):
Software Version
DRIVE OS Linux 5.2.6
DRIVE OS Linux 5.2.6 and DriveWorks 4.0
DRIVE OS Linux 5.2.0
DRIVE OS Linux 5.2.0 and DriveWorks 3.5
NVIDIA DRIVE™ Software 10.0 (Linux)
NVIDIA DRIVE™ Software 9.0 (Linux)
other DRIVE OS version
other

Target Operating System
Linux
QNX
other

Hardware Platform
NVIDIA DRIVE™ AGX Xavier DevKit (E3550)
NVIDIA DRIVE™ AGX Pegasus DevKit (E3550)
other

SDK Manager Version
1.9.1.10844
other

Host Machine Version
native Ubuntu 18.04
other

Hello,

what do I need to do to enable the PPS port on the 48-pin Cable Harness Connector CMC-1 (DB9
(GPIO/PPS)) so that the port is visible under /dev/pps0? There are similar topics here in the forum, but only for Jetson.

Thanks in advance

3

Dear @p.gibson,
Does this issue still need support?

4

Hello,
yes please, I would very much appreciate that.