Yes.
Please check below things.
- Please check setting the board in recovery and see if you notice additional NVIDIA device. Put the device back in normal mode.
- Change the host target connection wires and check changing the USB port on host side.
- Retry flashing the board flash.py script.
- Try manual flashing using bootburn
cd /drive/drive-foundation
make/bind_partitions -b p3710-10-s05 linux
#put the board in recovery mode(run tegrarecovery x1 on and tegrareset x1 on aurix)
tools/flashtools/bootburn/bootburn.py -b <board config> -B qspi
##put the board in normal mode(run tegrarecovery x1 off and tegrareset x1 on aurix)