Output of
NvShell> version
DRIVE-V6.0.0-P3710-AFW-Aurix-StepB-5.00.02
I also manually tried (similar to your solution from Flash failed. Orin no more recoverable or flashable - #12 by SivaRamaKrishnaNV) :
root@6.0.8.1-0006-build-linux-sdk:/drive# sudo -E bootburn.py -b p3710-10-a01 -B qspi -x /dev/ttyACM1
and the result is
[bootburnTegra-A]: [FlashUsingADB(889)] : [2500000.ufshci:0] Flashing for Partition A_secure-os
…
Write failed on (/dev/block/2500000.ufshci:0)
…
Therefore there seem to be problems with the flashing of that Flash connected via ufshci ?
As can also be seen in the bootlog file above,
Some issues with UFS can also be detected:
E> Top caller module: UFS, error module: UFS, reason: 0x04, aux_info: 0x00
Are these related?
The other partitions eMMC seem to flash properly.
One more Edit:
Now finally, via ACM0 sometimes there is bash shell, but it doesn’t seem to be be a full Ubuntu install… atm I can not reproduce how to boot into the shell. Will give more Infos later.
Thanks for your fast feedback up to now!
Best regards