Flash Jetpack 5.1.2 into Xavier Nx

[eric19980324]

Hello. I am new in flashing system to xavier nx.

1. I format my 128GB SSD.
2. And the I use sdk manager to flash into nx. During the steps, I choose using NVME to install
3. After the installation, I found the system is just 16GB, and I use GParted to see the hardware distribution is as the picture show. I want to know why the system was just allocated to 16GB? How to fix this problem.?
   
   
   
   
   

[DavidDDD]

Hi,

I believe this link could assist in resolving the issue.

JetPack 5.1.2/L4T 35.4.1 is now live

By further investigating, the root cause is that the layout used to flash external device is changed to “flash_l4t_t194_nvme.xml” from “flash_l4t_external.xml” in “nvsdkmanager_flash.sh” for T194 device. This only affects the customer who is using SDKM to flash device on T194 device. For customers who use initrd flash to flash device, there is no effect. For the customers who want to extend the size of APP partition on external device for T194 device, here is the workaround: Flashed the devi…