After multiple tries, we were able to flash the bare minimum JetPack 5.0.2. And fixed the flash.sh parameters that I missed, we were able to flash the kernel. However, we are still facing issues where the Jetson will not completely boot. It always gets stuck at a certain point:
[ 13.838607] using random self ethernet address
[ 13.845701] using random host ethernet address
Please find attached a write up of what we’ve done as well as all the log files we have.
Jetson_Logs_20221026.zip (148.6 KB)
Jetson_Kernel_Modification_Steps_v2.pdf (1.6 MB)