Frequent and unspecific "System Program Problem"

Robotics & Edge Computing Jetson & Embedded Systems Jetson Xavier NX
1

I’m frequently getting nonspecific error messages that prompt me to send an error report. If I try to send an error report, it ultimately fails for different reasons. Given the error isn’t specific, I’m having a hard time figuring out what is going wrong.

Attached is a photo of the error message, apologies for the poor image quality.

20201122_185859
20201122_1858592276×776 657 KB

I have tried rebooting the machine, and I have tried just ignoring it, both don’t seem to solve the issue.

Should I be concerned? Is there a solution?

Thanks so much

3

Hi,
It is harmless and you can simply cancel it. The system should work well even though the warning message pops up.

4

I think if you want to know the issue then it should have something to show details. If you have not rebooted, then you could also:
sudo cat /var/log/apport

6

sudo cat /var/log/apport.log

ERROR: apport (pid 22803) Thu Oct 14 10:30:55 2021: called for pid 20483, signal 11, core limit 0, dump mode 1
ERROR: apport (pid 22803) Thu Oct 14 10:30:55 2021: executable: /usr/sbin/nvargus-daemon (command line "/usr/sbin/nvargus-daemon")
ERROR: apport (pid 22803) Thu Oct 14 10:30:55 2021: is_closing_session(): no DBUS_SESSION_BUS_ADDRESS in environment
ERROR: apport (pid 22803) Thu Oct 14 10:30:59 2021: wrote report /var/crash/_usr_sbin_nvargus-daemon.0.crash

ps: this is posted simply as an example.

7

You’ll need to start a new topic. I’ll suggest to include both the command and error received which triggers the need for the bug report, plus the apport.log you included above. Basically you’d need to include how the bug is triggered (which in part means including which L4T/SDK Manager release you’re using as well).

8

Sorry, my intention was simply to give an actual example to the thread.