Without serial console. I’ve try insert text in /boot/extlinux/extlinux.conf any ideas ? thank you

To disable GUI on boot, run: sudo systemctl set-default multi-user.target To enable GUI again issue the command: sudo systemctl set-default graphical.target to start Gui session on a system without a current GUI just execute: sudo systemctl start gdm3.service The same instructions that work fo…

thanks Caleb !! Now there are more RAM available: boot from text mode $ free -m Mem total 3956 used 319 Start X system from text mode: $ sudo systemctl start gdm3.service $ free -m Mem total 3956 used 838 (with xfce instead of gnome desktop environment)

Hey Caleb, I want to start the jetson nano in console mode (no serial) but with autologin enabled, what file do I need to write to, to enable it? and what text is inserted? thanks… regards

There is no “autologin” without a session manager, and the session manager is a graphical system. What do you really want to do? Start some software on boot? The best way to do this is to create a “unit” file for your software in /etc/systemd/system/yourname.service The documentation for these un…

snarky, that’s what I want to! start some software on boot. I’m going to do that, Thanks a lot…

An important note, my Jetson nano would only display the console in text mode on HDMI. Scared me for a sec because DP was only a black screen.

[image] luisr2d2: gin enabled, what file do I need to write to, to enable it? and what text is inserted? thanks… regards This is working for me: https://askubuntu.com/questions/819117/how-can-i-get-autologin-at-startup-working-on-ubuntu-server-16-04-1/819154#819154

[image] caleb.a.mccarthy: sudo systemctl set-default graphical.target Hi, would it be possible to show the text console on the dp port? Or, hide te tekst console in any sort of way? Thanks

gdm3 connects to the network even without logging in at the login screen. Same is not the case when GUI is disabled. Jetson in non-GUI mode does not connect to the network on the black login prompt screen. Probably you’re looking for auto connect to the network at the login prompt. So that ssh fi…

Hi, Thanks for the reply. Actually, I don’t want the network login. I use the nano as a video player. Therefore I want the screen be completely black, without the tty1 login: For now I solved it by changing from gnome to lxde desktop. Auto-login and hide the bar and set the desktop to black. A…

Hi guys, you may use the tool jetson_config → desktop → [B2] console auto-login. this works fine for me.

How to boot Jetson Nano in text mode?

Robotics & Edge Computing Jetson Systems Jetson Nano

motyaedu July 14, 2020, 2:04pm 8

This is working for me:

https://askubuntu.com/questions/819117/how-can-i-get-autologin-at-startup-working-on-ubuntu-server-16-04-1/819154#819154

Topic		Replies	Views
Boot Jetson Nano without Command Prompt Jetson Nano boot	1	750	October 12, 2020
Cannot boot jetson orin nano after enabling the terminal on startup (sudo systemctl set-default multi-user.target) Jetson Orin Nano ubuntu	8	329	September 2, 2024
Need to restore GUI Jetson Nano boot	3	421	February 27, 2024
Jetson Nano 2GB how to disable Headless mode on boot/startup Jetson Nano boot , headless , nano2gb	1	1922	January 1, 2021
after i disable GUI,i can not enter the text mode. Jetson Nano	2	924	June 17, 2019
NVIDIA Jetson Nano 2GB Auto Login doesn't work Jetson Nano ubuntu , nvbugs , nano2gb	9	5339	February 25, 2021
Detect GPIO pins on boot and make decision accordingly Jetson TX2 boot , gpio	29	2467	June 3, 2022
How do I get a screen connected with HDMI to show the desktop enviroment? Jetson Nano ubuntu	5	749	June 9, 2022
Jetson Nano auto log in account when poweron without need to press enter Jetson Nano ubuntu , nano2gb	11	4043	December 29, 2021
Restore the GUI Desktop of jetson nano Jetson Nano ubuntu	2	3312	June 4, 2020

How to boot Jetson Nano in text mode?

Related topics