Hi WayneWWW,
Very appreciate your insights! I will add print in panel-a-1200-800-8-0.c.
I have updated display-timing part of .dtsi and the following is dmesg and updated .dtsi:
dmesg:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-2713) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Dec 9 22:47:42 PST 2019
[ 0.000000] Boot CPU: AArch64 Processor [411fd071]
[ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32,
[ 0.000000] OF: fdt: - 80000000 , 7ee00000
[ 0.000000] OF: fdt: - 100000000 , 7f200000
[ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
[ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
[ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
[ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout
[ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout
[ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops
[ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000
[ 0.000000] On node 0 totalpages: 1039872
[ 0.000000] DMA zone: 8192 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 519168 pages, LIFO batch:31
[ 0.000000] Normal zone: 8136 pages used for memmap
[ 0.000000] Normal zone: 520704 pages, LIFO batch:31
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc0fefaf000 s61592 r8192 d32616 u102400
[ 0.000000] pcpu-alloc: s61592 r8192 d32616 u102400 alloc=25*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] CPU features: enabling workaround for ARM erratum 832075
[ 0.000000] Speculative Store Bypass Disable mitigation not required
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544
[ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,2 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 quiet
[ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes
[ 0.000000] log_buf_len min size: 32768 bytes
[ 0.000000] log_buf_len: 131072 bytes
[ 0.000000] early log buf free: 29496(90%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Memory: 3570396K/4159488K available (15230K kernel code, 2926K rwdata, 6620K rodata, 8576K init, 609K bss, 113956K reserved, 475136K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f60000 ( 15232 KB)
[ 0.000000] .rodata : 0xffffff8008f60000 - 0xffffff80095e0000 ( 6656 KB)
[ 0.000000] .init : 0xffffff80095e0000 - 0xffffff8009e40000 ( 8576 KB)
[ 0.000000] .data : 0xffffff8009e40000 - 0xffffff800a11b808 ( 2927 KB)
[ 0.000000] .bss : 0xffffff800a11b808 - 0xffffff800a1b3dbc ( 610 KB)
[ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
[ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller
[ 0.000000] t210 clock and reset probe
[ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.001706] Console: colour dummy device 80x25
[ 0.001727] console [tty0] enabled
[ 0.001745] kmemleak: Kernel memory leak detector disabled
[ 0.001764] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[ 0.001778] pid_max: default: 32768 minimum: 301
[ 0.002222] Security Framework initialized
[ 0.002445] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.002454] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.003544] ftrace: allocating 47001 entries in 184 pages
[ 0.174993] sched-energy: CPU device node has no sched-energy-costs
[ 0.175029] ASID allocator initialised with 65536 entries
[ 0.211849] tegra-id: chipid=22117.
[ 0.211863] tegra-id: opt_subrevision=0.
[ 0.211882] Tegra Speedo/IDDQ fuse revision 4
[ 0.211887] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2
[ 0.211892] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0
[ 0.211897] Tegra: CPU Speedo Value 2068, SoC Speedo Value 1961, GPU Speedo Value 2072
[ 0.211900] Tegra: CPU IDDQ Value 2164, SoC IDDQ Value 2268, GPU IDDQ Value 2955
[ 0.211918] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 1
[ 0.211933] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-b00-hdmi-dsi.dts
[ 0.211942] DTB Build time: Feb 25 2020 14:09:40
[ 0.261022] CPU1: Booted secondary processor [411fd071]
[ 0.292968] CPU2: Booted secondary processor [411fd071]
[ 0.324933] CPU3: Booted secondary processor [411fd071]
[ 0.325024] Brought up 4 CPUs
[ 0.325030] SMP: Total of 4 processors activated.
[ 0.325037] CPU features: detected feature: 32-bit EL0 Support
[ 0.325302] CPU: All CPU(s) started at EL2
[ 0.325320] alternatives: patching kernel code
[ 0.333383] devtmpfs: initialized
[ 0.370741] Initilizing CustomIPI irq domain
[ 0.371139] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.371164] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.381651] pinctrl core: initialized pinctrl subsystem
[ 0.382279] OS set in device tree is not L4T.
[ 0.382683] regulator-dummy: no parameters
[ 0.382946] Initializing plugin-manager
[ 0.383047] Plugin module not found
[ 0.383277] node /plugin-manager/fragement@0 match with board >=3448-0000-100
[ 0.383825] node /plugin-manager/fragment@1 match with board >=3448-0000-101
[ 0.384871] node /plugin-manager/fragement@6 match with odm-data enable-tegra-wdt
[ 0.385395] node /plugin-manager/fragement@8 match with odm-data enable-tegra-wdt
[ 0.385840] node /plugin-manager/fragement@9 match with board <3448-0000-300
[ 0.390639] NET: Registered protocol family 16
[ 0.391933] pstore: using zlib compression
[ 0.391964] console [pstore-1] enabled
[ 0.391968] pstore: Registered ramoops as persistent store backend
[ 0.391973] ramoops: attached 0x200000@0xb0000000, ecc: 0/0
[ 0.401042] cpuidle: using governor menu
[ 0.404281] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver
[ 0.406094] vdso: 2 pages (1 code @ ffffff8008f67000, 1 data @ ffffff8009e44000)
[ 0.406117] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.409435] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations
[ 0.412098] tegra_powergate_init: DONE
[ 0.412113] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-b00-hdmi-dsi.dts
[ 0.412121] DTB Build time: Feb 25 2020 14:09:40
[ 0.413912] Tegra reboot handler registered.
[ 0.418431] iommu: Adding device tegra-carveouts to group 0
[ 0.418569] platform tegra-carveouts: domain=ffffffc0f943c318 allocates as[0]=ffffffc0f94180a8
[ 0.418920] iommu: Adding device smmu_test to group 1
[ 0.418968] platform smmu_test: domain=ffffffc0f943c558 allocates as[0]=ffffffc0f9418110
[ 0.419770] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000
[ 0.419832] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000
[ 0.419885] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000
[ 0.419895] nv-tegra-mc 70019000.mc: No mssnvlink node
[ 0.419915] mc-err: mcerr ops are set to t21x
[ 0.430050] iommu: Adding device 70090000.xusb to group 2
[ 0.430345] iommu: Adding device 70006000.serial to group 3
[ 0.430405] platform 70006000.serial: domain=ffffffc0f9400c18 allocates as[0]=ffffffc0f9418178
[ 0.430817] iommu: Adding device 70006040.serial to group 4
[ 0.431067] iommu: Adding device 70006200.serial to group 5
[ 0.431254] iommu: Adding device sound to group 6
[ 0.431303] platform sound: domain=ffffffc0f94ba198 allocates as[0]=ffffffc0f94181e0
[ 0.431850] iommu: Adding device 7000d400.spi to group 7
[ 0.432111] iommu: Adding device 7000d600.spi to group 8
[ 0.432408] iommu: Adding device 70410000.spi to group 9
[ 0.432710] iommu: Adding device 50000000.host1x to group 10
[ 0.432975] iommu: Adding device 54080000.vi to group 11
[ 0.433414] iommu: Adding device 54600000.isp to group 12
[ 0.433683] iommu: Adding device 54680000.isp to group 13
[ 0.433952] iommu: Adding device tegradc.0 to group 14
[ 0.434003] platform tegradc.0: domain=ffffffc0f94c60d8 allocates as[0]=ffffffc0f9418248
[ 0.434514] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000)
[ 0.434820] iommu: Adding device tegradc.1 to group 15
[ 0.434867] platform tegradc.1: domain=ffffffc0f94c6318 allocates as[0]=ffffffc0f94182b0
[ 0.435367] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000)
[ 0.435786] iommu: Adding device 54340000.vic to group 16
[ 0.435982] iommu: Adding device 544c0000.nvenc to group 17
[ 0.436172] iommu: Adding device 54500000.tsec to group 18
[ 0.436363] iommu: Adding device 54100000.tsecb to group 19
[ 0.436565] iommu: Adding device 54480000.nvdec to group 20
[ 0.436752] iommu: Adding device 54380000.nvjpg to group 21
[ 0.437842] iommu: Adding device 546c0000.i2c to group 22
[ 0.438161] iommu: Adding device 57000000.gpu to group 23
[ 0.438221] platform 57000000.gpu: domain=ffffffc0f955b3d8 allocates as[0]=ffffffc0f9418318
[ 0.438277] platform 57000000.gpu: domain=ffffffc0f955b3d8 allocates as[1]=ffffffc0f9418380
[ 0.438315] platform 57000000.gpu: domain=ffffffc0f955b3d8 allocates as[2]=ffffffc0f94183e8
[ 0.438346] platform 57000000.gpu: domain=ffffffc0f955b3d8 allocates as[3]=ffffffc0f9418450
[ 0.439177] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
[ 0.439186] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present
[ 0.439197] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET
[ 0.439201] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM
[ 0.439206] tegra-pmc: ### PMC reset status reg: 0x0
[ 0.489229] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered
[ 0.489239] tegra-pmc: Clear bootloader IO dpd settings
[ 0.489259] tegra-pmc 7000e400.pmc: IO padctrl driver initialized
[ 0.489325] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands
[ 0.489609] iommu: Adding device 70012000.se to group 24
[ 0.490479] iommu: Adding device 7000c000.i2c to group 25
[ 0.490788] iommu: Adding device 7000c400.i2c to group 26
[ 0.491078] iommu: Adding device 7000c500.i2c to group 27
[ 0.491375] iommu: Adding device 7000c700.i2c to group 28
[ 0.491670] iommu: Adding device 7000d000.i2c to group 29
[ 0.491993] iommu: Adding device 7000d100.i2c to group 30
[ 0.492346] iommu: Adding device sdhci-tegra.0 to group 31
[ 0.492405] platform sdhci-tegra.0: domain=ffffffc0f9569558 allocates as[0]=ffffffc0f94184b8
[ 0.493437] iommu: Adding device 700d0000.xudc to group 32
[ 0.497754] vdd-ac-bat: 5000 mV
[ 0.498190] vdd-5v0-sys: 5000 mV
[ 0.499320] vdd-5v0-hdmi: supplied by vdd-5v0-sys
[ 0.499357] vdd-5v0-hdmi: 5000 mV
[ 0.499867] vdd-1v8-sys: 1800 mV
[ 0.500411] vdd-fan: supplied by vdd-5v0-sys
[ 0.500444] vdd-fan: 5000 mV
[ 0.500928] vdd-usb-vbus: supplied by vdd-5v0-sys
[ 0.500963] vdd-usb-vbus: 5000 mV
[ 0.501654] vdd-usb-vbus2: 5000 mV
[ 0.530102] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.532476] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip
[ 0.535317] GPIO line 151 (camera-control-output-low) hogged as output/low
[ 0.535340] GPIO line 152 (camera-control-output-low) hogged as output/low
[ 0.535380] GPIO line 6 (system-suspend-gpio) hogged as output/high
[ 0.535772] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio)
[ 0.543588] eventlib_kernel: keventlib is initialized, test id: 0
[ 0.543929] SCSI subsystem initialized
[ 0.544153] libata version 3.00 loaded.
[ 0.544427] usbcore: registered new interface driver usbfs
[ 0.544480] usbcore: registered new interface driver hub
[ 0.544555] usbcore: registered new device driver usb
[ 0.548406] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8
[ 0.553106] vdd-core: 600 <--> 1162 mV at 1075 mV
[ 0.554098] random: fast init done
[ 0.554105] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV
[ 0.557158] vdd-ddr-1v1: 1150 mV
[ 0.560983] vdd-pre-reg-1v35: 1350 mV
[ 0.564985] vdd-1v8: 1800 mV
[ 0.568982] avdd-sys-1v2: 1200 mV
[ 0.572981] vdd-pex-1v0: 1050 mV
[ 0.573603] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV
[ 0.574136] max77620-ldo3: at 3100 mV
[ 0.576983] vdd-rtc: 850 <--> 1100 mV at 1000 mV
[ 0.577551] max77620-ldo5: at 3100 mV
[ 0.578097] max77620-ldo6: at 2800 mV
[ 0.580984] avdd-1v05-pll: 1050 mV
[ 0.584981] avdd-io-hdmi-dp: 1050 mV
[ 0.587550] GPIO line 505 (spmic-default-output-high) hogged as output/high
[ 0.587822] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio)
[ 0.588096] max77620 4-003c: max77620 probe successful
[ 0.590807] media: Linux media interface: v0.10
[ 0.590862] Linux video capture interface: v2.00
[ 0.591718] pps_core: LinuxPPS API ver. 1 registered
[ 0.591725] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.591741] PTP clock support registered
[ 0.595220] tegra_fiq_debugger_init: found FIQ source (IRQ 98)
[ 0.601643] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table
[ 0.602436] Advanced Linux Sound Architecture Driver Initialized.
[ 0.603086] Bluetooth: Core ver 2.22
[ 0.603139] NET: Registered protocol family 31
[ 0.603143] Bluetooth: HCI device and connection manager initialized
[ 0.603158] Bluetooth: HCI socket layer initialized
[ 0.603166] Bluetooth: L2CAP socket layer initialized
[ 0.603195] Bluetooth: SCO socket layer initialized
[ 0.604878] tegra210_dvfs: no clock found for sdmmc2_ddr
[ 0.604896] tegra210_dvfs: no clock found for sdmmc4_ddr
[ 0.604972] tegra210_dvfs: no clock found for sdmmc1_ddr
[ 0.604986] tegra210_dvfs: no clock found for sdmmc3_ddr
[ 0.608155] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe
[ 0.609463] vdd-3v3-sys: supplied by vdd-5v0-sys
[ 0.609532] vdd-3v3-sys: 3300 mV
[ 0.609802] vdd-1v8-sys: supplied by vdd-3v3-sys
[ 0.613060] vdd-usb-vbus2: supplied by vdd-3v3-sys
[ 0.613517] vdd-3v3-sd: supplied by vdd-3v3-sys
[ 0.613552] vdd-3v3-sd: 3300 mV
[ 0.614584] avdd-io-edp-1v05: supplied by avdd-1v05-pll
[ 0.614622] avdd-io-edp-1v05: 1050 mV
[ 0.615054] vdd-usb-hub-en: supplied by vdd-1v8-sys
[ 0.615092] vdd-usb-hub-en: 5000 mV
[ 0.616410] camchar: rtcpu character device driver loaded
[ 0.617279] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0
[ 0.618614] clocksource: Switched to clocksource arch_sys_counter
[ 0.658458] VFS: Disk quotas dquot_6.6.0
[ 0.658583] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.659134] nvmap_heap_init: nvmap_heap_init: created heap block cache
[ 0.659545] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000
[ 0.659563] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000)
[ 0.659758] cma: enabled page replacement for spfn=d7000, epfn=f0000
[ 0.659763] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful
[ 0.659777] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout
[ 0.659803] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048
[ 0.659809] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout
[ 0.659822] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways
[ 0.659831] nvmap_page_pool_init: Total RAM pages: 1011383
[ 0.659836] nvmap_page_pool_init: nvmap page pool size: 126422 pages (493 MB)
[ 0.659925] nvmap_background_zero_thread: PP zeroing thread starting.
[ 0.660383] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB)
[ 0.661297] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB)
[ 0.669616] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm
[ 0.670031] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm
[ 0.670291] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm
[ 0.670495] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm
[ 0.670700] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die
[ 0.670957] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz
[ 0.670962] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB
[ 0.671399] NET: Registered protocol family 2
[ 0.672442] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.672653] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.673148] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.673295] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.673376] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.673791] NET: Registered protocol family 1
[ 0.674446] RPC: Registered named UNIX socket transport module.
[ 0.674452] RPC: Registered udp transport module.
[ 0.674455] RPC: Registered tcp transport module.
[ 0.674458] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.674472] PCI: CLS 0 bytes, default 64
[ 0.674763] Trying to unpack rootfs image as initramfs...
[ 0.906811] Freeing initrd memory: 5356K
[ 0.916760] host1x 50000000.host1x: initialized
[ 0.918569] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 0.921755] audit: initializing netlink subsys (disabled)
[ 0.921822] audit: type=2000 audit(0.771:1): initialized
[ 0.922646] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 0.932773] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.934233] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.935044] 9p: Installing v9fs 9p2000 file system support
[ 0.938278] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240)
[ 0.938415] io scheduler noop registered
[ 0.938746] io scheduler cfq registered (default)
[ 0.941363] gic 702f9000.agic: GIC IRQ controller registered
[ 0.944399] iommu: Adding device 702ef000.adsp to group 33
[ 0.953745] iommu: Adding device aconnect@702c0000:adsp_audio to group 34
[ 0.953902] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered
[ 0.954500] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x69e740e
[ 0.954508] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4
[ 0.956129] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb
[ 0.956235] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb
[ 0.956356] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb
[ 0.956547] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1
[ 0.956639] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4
[ 0.956732] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4
[ 0.956817] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4
[ 0.956905] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4
[ 0.956997] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb
[ 0.957083] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb
[ 0.963151] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops
[ 0.964845] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000
[ 0.966774] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration
[ 0.968058] tegra-pcie 1003000.pcie: PCIE: Enable power rails
[ 0.968422] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes
[ 0.969877] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe
[ 0.970111] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=750000, max_bw=1500000
[ 0.970382] Adding domain tsec-pd to PM domain host1x-pd
[ 0.972698] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes
[ 0.973574] tsec 54500000.tsec: initialized
[ 0.975236] tsec 54100000.tsecb: initialized
[ 0.975921] Adding domain nvdec-pd to PM domain host1x-pd
[ 0.979268] nvdec 54480000.nvdec: initialized
[ 0.980273] Adding domain vic03-pd to PM domain host1x-pd
[ 0.980448] Adding domain msenc-pd to PM domain host1x-pd
[ 0.980614] Adding domain nvjpg-pd to PM domain host1x-pd
[ 0.984665] falcon 54340000.vic: initialized
[ 0.985855] falcon 544c0000.nvenc: initialized
[ 0.987235] falcon 54380000.nvjpg: initialized
[ 0.991338] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=97
[ 0.991377] tegra_cec 70015000.tegra_cec: Enable clock result: 0.
[ 0.991406] tegra_cec 70015000.tegra_cec: tegra_cec_init started
[ 0.991569] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1
[ 0.991687] display board info: id 0x0, fab 0x0
[ 0.991693] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0
[ 0.991699] tegra_cec 70015000.tegra_cec: probed
[ 0.991753] generic_infoframe_type: 0x87
[ 0.991897] tegradc tegradc.0: DT parsed successfully
[ 0.991948] tegradc tegradc.0: Display dc.ffffff800ab40000 registered with id=0
[ 0.999563] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
[ 0.999786] tegradc tegradc.0: probed
[ 1.000466] Console: switching to colour frame buffer device 80x30
[ 1.000498] tegradc tegradc.0: fb registered
[ 1.001909] tegradc tegradc.1: disp1 connected to head1->/host1x/dsi
[ 1.002081] tegradc tegradc.1: No hpd-gpio in DT
[ 1.002172] tegradc tegradc.1: DT parsed successfully
[ 1.002229] tegradc tegradc.1: Display dc.ffffff800acc0000 registered with id=1
[ 1.003037] tegradc tegradc.1: prod settings missing -19
[ 1.003533] tegradc tegradc.1: pad_ab_default not found -19
[ 1.003539] tegradc tegradc.1: pad_ab_idle not found -19
[ 1.003544] tegradc tegradc.1: pad_cd_default not found -19
[ 1.003548] tegradc tegradc.1: pad_cd_idle not found -19
[ 1.004688] tegradc tegradc.1: probed
[ 1.005098] tegradc tegradc.1: fb registered
[ 1.005450] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels
[ 1.007112] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized
[ 1.007475] kfuse 7000fc00.kfuse: initialized
[ 1.008239] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available
[ 1.009121] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0
[ 1.010008] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now
[ 1.010019] vdd-cpu: 708 <--> 1322 mV at 708 mV
[ 1.010399] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed
[ 1.011799] vdd-gpu: applied init 1000000uV constraint
[ 1.011806] vdd-gpu: 708 <--> 1323 mV at 997 mV
[ 1.012192] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed
[ 1.016053] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.016161] No Device Node present for smmu client: serial8250 !!
[ 1.016172] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000)
[ 1.016210] iommu: Adding device serial8250 to group 35
[ 1.018495] console [ttyS0] disabled
[ 1.018649] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra
[ 1.018755] console [ttyS0] enabled
[ 1.019651] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART
[ 1.019943] serial-tegra 70006200.serial: RX in PIO mode
[ 1.020029] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART
[ 1.020974] [drm] Initialized
[ 1.031628] brd: module loaded
[ 1.037209] loop: module loaded
[ 1.037315] tegra_profiler: version: 1.139, samples/io: 47/27
[ 1.037432] tegra_profiler: auth: init
[ 1.038855] THERMAL EST: found 2 subdevs
[ 1.038866] THERMAL EST num_resources: 0
[ 1.038872] [THERMAL EST subdev 0]
[ 1.038880] [THERMAL EST subdev 1]
[ 1.039328] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est
[ 1.039334] THERMAL EST: thz register success.
[ 1.039497] THERMAL EST: end of probe, return err: 0
[ 1.040716] hisi_sas: driver version v1.6
[ 1.045068] tegra-qspi 70410000.spi: Prod settings list not found
[ 1.046347] qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes)
[ 1.046359] qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0
[ 1.049517] libphy: Fixed MDIO Bus: probed
[ 1.050142] tun: Universal TUN/TAP device driver, 1.6
[ 1.050146] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.051166] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.051173] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.051228] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 1.051232] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.051286] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 1.051289] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 1.051341] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4
[ 1.051346] Copyright(c) 1999 - 2017 Intel Corporation.
[ 1.052361] PPP generic driver version 2.4.2
[ 1.052614] PPP BSD Compression module registered
[ 1.052618] PPP Deflate Compression module registered
[ 1.052659] PPP MPPE Compression module registered
[ 1.052668] NET: Registered protocol family 24
[ 1.052761] usbcore: registered new interface driver r8152
[ 1.052808] usbcore: registered new interface driver asix
[ 1.052857] usbcore: registered new interface driver ax88179_178a
[ 1.052900] usbcore: registered new interface driver cdc_ether
[ 1.052940] usbcore: registered new interface driver net1080
[ 1.052981] usbcore: registered new interface driver cdc_subset
[ 1.053019] usbcore: registered new interface driver zaurus
[ 1.053075] usbcore: registered new interface driver cdc_ncm
[ 1.053250] VFIO - User Level meta-driver version: 0.3
[ 1.054542] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.054563] ehci-pci: EHCI PCI platform driver
[ 1.054668] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.054680] ohci-pci: OHCI PCI platform driver
[ 1.054721] ohci-platform: OHCI generic platform driver
[ 1.057432] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP
[ 1.058048] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0
[ 1.059538] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f927c400 id
[ 1.061834] usbcore: registered new interface driver uas
[ 1.061908] usbcore: registered new interface driver usb-storage
[ 1.062044] usbcore: registered new interface driver usbserial
[ 1.062432] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release
[ 1.062483] tegra-xusb 70090000.xusb: xHCI Host Controller
[ 1.062510] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1
[ 1.063300] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010
[ 1.063364] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000
[ 1.063644] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.063650] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.063655] usb usb1: Product: xHCI Host Controller
[ 1.063660] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd
[ 1.063665] usb usb1: SerialNumber: 70090000.xusb
[ 1.064389] hub 1-0:1.0: USB hub found
[ 1.064483] hub 1-0:1.0: 5 ports detected
[ 1.065201] tegra-xusb 70090000.xusb: xHCI Host Controller
[ 1.065215] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2
[ 1.065303] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.065411] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.065417] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.065421] usb usb2: Product: xHCI Host Controller
[ 1.065426] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd
[ 1.065430] usb usb2: SerialNumber: 70090000.xusb
[ 1.065876] tegra-xudc-new 700d0000.xudc: device count: 1
[ 1.065967] hub 2-0:1.0: USB hub found
[ 1.066004] hub 2-0:1.0: 4 ports detected
[ 1.067595] tegra-xudc-new 700d0000.xudc: USB charger detection disabled
[ 1.067614] tegra-xudc-new 700d0000.xudc: vbus state: 0
[ 1.067648] tegra-xudc-new 700d0000.xudc: entering ELPG
[ 1.067915] tegra-xudc-new 700d0000.xudc: entering ELPG done
[ 1.068623] mousedev: PS/2 mouse device common for all mice
[ 1.068744] usbcore: registered new interface driver xpad
[ 1.166810] usb usb1: usb_suspend_both: status 0
[ 1.199956] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
[ 1.202486] rtc rtc1: alarm rtc device
[ 1.202506] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
[ 1.202537] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
[ 1.203158] i2c /dev entries driver
[ 1.205159] imx219 6-0010: tegracam sensor driver:imx219_v2.0.6
[ 1.228495] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10
[ 1.228577] imx219 6-0010: imx219_board_setup: error during i2c read probe (-121)
[ 1.236164] imx219 6-0010: board setup failed
[ 1.240636] imx219: probe of 6-0010 failed with error -121
[ 1.241648] max77620-power max77620-power: Event recorder REG_NVERC : 0x0
[ 1.244487] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2
[ 1.244494] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4
[ 1.244963] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 1.244983] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC
[ 1.244994] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC
[ 1.245128] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 1.245139] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC
[ 1.245146] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC
[ 1.245291] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 1.245302] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC
[ 1.245307] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature
[ 1.245483] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19
[ 1.246293] tegra_aotag tegra-aotag: Registering sensor 0
[ 1.246352] tegra_aotag tegra-aotag: Invalid temp readout
[ 1.246381] tegra_aotag tegra-aotag: Invalid temp readout
[ 1.246399] tegra_aotag tegra-aotag: Bound to TZ : ID 0
[ 1.246410] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0
[ 1.247417] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 1.247440] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered
[ 1.247634] tegra_aotag tegra-aotag: Invalid temp readout
[ 1.247666] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered
[ 1.248125] parse_throttle_dt_data: Num cap clks = 6
[ 1.248132] parse_throttle_dt_data: clk=cclk_g type=2
[ 1.248147] parse_throttle_dt_data: clk=gpu type=4
[ 1.248171] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0
[ 1.248191] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0
[ 1.248214] parse_throttle_dt_data: clk=cap.throttle.sclk type=0
[ 1.248217] parse_throttle_dt_data: clk=emc type=3
[ 1.248663] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 1.248768] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 1.248946] tegra_throttle_probe: probe successful. #cdevs=4
[ 1.249751] FAN dev name: pwm-fan
[ 1.249850] FAN:gpio request success.
[ 1.249927] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255
[ 1.250229] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal
[ 1.250395] pwm_fan_driver pwm-fan: fan tach request irq success
[ 1.250406] pwm_fan_driver pwm-fan: tach period: 1000
[ 1.250509] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2
[ 1.250514] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2
[ 1.250520] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2
[ 1.250525] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2
[ 1.250530] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3
[ 1.250535] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3
[ 1.250539] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3
[ 1.250544] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4
[ 1.250549] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4
[ 1.250554] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4
[ 1.251220] tegra-wdt 60005100.watchdog: Tegra WDT enabled on probe. Timeout = 120 seconds.
[ 1.251647] tegra-wdt 60005100.watchdog: initialized (timeout = 120 sec, nowayout = 1)
[ 1.252604] device-mapper: uevent: version 1.0.3
[ 1.253129] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 1.258675] tegra210-cpufreq cpufreq: probe()...completed
[ 1.259370] sdhci: Secure Digital Host Controller Interface driver
[ 1.259372] sdhci: Copyright(c) Pierre Ossman
[ 1.259374] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.259832] sdhci-tegra sdhci-tegra.0: Got CD GPIO
[ 1.260172] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful
[ 1.260300] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300
[ 1.264704] tegra-se 70012000.se: tegra_se_probe: complete
[ 1.265188] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.266302] usbcore: registered new interface driver usbhid
[ 1.266305] usbhid: USB HID core driver
[ 1.268414] tegra21x_actmon 6000c800.actmon: in actmon_register()...
[ 1.268581] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all
[ 1.270310] nvpmodel: initialized successfully
[ 1.271323] usbcore: registered new interface driver snd-usb-audio
[ 1.271380] No Device Node present for smmu client: snd-soc-dummy !!
[ 1.271385] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000)
[ 1.271403] iommu: Adding device snd-soc-dummy to group 36
[ 1.283582] OPE platform probe
[ 1.283669] OPE platform probe successful
[ 1.283697] OPE platform probe
[ 1.283787] OPE platform probe successful
[ 1.284503] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0
[ 1.310256] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok
[ 1.310395] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok
[ 1.310528] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok
[ 1.310677] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok
[ 1.310812] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok
[ 1.310938] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok
[ 1.311069] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok
[ 1.311197] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok
[ 1.311325] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok
[ 1.311464] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok
[ 1.311997] tegradc tegradc.1: nominal-pclk:74880000 parent:74879589 div:1.0 pclk:74879589 74131200~81619200
[ 1.312560] tegradc tegradc.1: DSI: HS clock rate is 409500
[ 1.318764] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr
[ 1.327642] u32 classifier
[ 1.327645] Actions configured
[ 1.327716] Initializing XFRM netlink socket
[ 1.328427] NET: Registered protocol family 10
[ 1.329044] NET: Registered protocol family 17
[ 1.329056] NET: Registered protocol family 15
[ 1.329130] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.329179] Bluetooth: RFCOMM socket layer initialized
[ 1.329189] Bluetooth: RFCOMM ver 1.11
[ 1.329194] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.329199] Bluetooth: HIDP socket layer initialized
[ 1.329217] 9pnet: Installing 9P2000 support
[ 1.329253] Key type dns_resolver registered
[ 1.329615] Registered cp15_barrier emulation handler
[ 1.329621] Registered setend emulation handler
[ 1.330690] registered taskstats version 1
[ 1.331214] Adding domain ve2-pd to PM domain host1x-pd
[ 1.331465] Adding domain ve-pd to PM domain host1x-pd
[ 1.398707] tegra-pcie 1003000.pcie: link 0 down, retrying
[ 1.516937] mmc0: hw tuning done ...
[ 1.516977] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
[ 1.517319] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[ 1.519969] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14
[ 1.755885] isp 54600000.isp: initialized
[ 1.756750] isp 54680000.isp: initialized
[ 1.766854] last reset is due to power on reset
[ 1.766858] KERNEL: PMC reset status reg: 0x0
[ 1.766934] BL: PMC reset status reg: 0x0
[ 1.766936] BL: PMIC poweroff Event Recorder: 0x40
[ 1.768319] clk_cbus_recalc_rate: no gbus parent
[ 1.768325] clk_cbus_round_rate: no gbus parent
[ 1.768327] clk_cbus_round_rate: no gbus parent
[ 1.768335] clk_cbus_recalc_rate: no gbus parent
[ 1.768434] clk_cbus_recalc_rate: no gbus parent
[ 1.768438] clk_cbus_round_rate: no gbus parent
[ 1.768440] clk_cbus_round_rate: no gbus parent
[ 1.768444] clk_cbus_recalc_rate: no gbus parent
[ 1.769136] tegra_dvfs: GPU-cap: registered
[ 1.769194] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled
[ 1.769196] tegra dvfs: vdd-core: nominal 1075mV, offset 600000uV, step 12500uV, scaling enabled
[ 1.769199] tegra dvfs: vdd-gpu: nominal 1058mV, offset 708000uV, step 10000uV, scaling enabled
[ 1.770533] tegra_dvfs: vdd-gpu-vts: registered
[ 1.771199] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered
[ 1.771822] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered
[ 1.772315] input: gpio-keys as /devices/gpio-keys/input/input1
[ 1.800737] tegra-pcie 1003000.pcie: link 0 down, retrying
[ 1.803302] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:00:25 UTC (946688425)
[ 1.804279] vi 54080000.vi: vi_probe: ++
[ 1.807342] vi 54080000.vi: initialized
[ 1.808496] vi 54080000.vi: subdev nvcsi--1 bound
[ 1.808714] mmcblk mmc0:aaaa: Card claimed for testing.
[ 1.809266] Disable partitions left on by BL
[ 1.809269] disb
[ 1.809305] bwmgr: missing cdev-type property
[ 1.809393] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
[ 1.809400] DRAM derating cdev registered.
[ 1.810482] vdd-fan: disabling
[ 1.810485] vdd-usb-vbus: disabling
[ 1.810487] vdd-usb-vbus2: disabling
[ 1.810496] avdd-io-edp-1v05: disabling
[ 1.810499] vdd-usb-hub-en: disabling
[ 1.810615] ALSA device list:
[ 1.810619] #0: tegra-hda at 0x70038000 irq 83
[ 1.810621] #1: tegra-snd-t210ref-mobile-rt565x
[ 1.813703] Freeing unused kernel memory: 8576K
[ 1.833973] Root device found: mmcblk0p1
[ 1.835077] Found dev node: /dev/mmcblk0p1
[ 1.879081] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.879797] Rootfs mounted over mmcblk0p1
[ 1.904466] Switching from initrd to actual rootfs
[ 2.002624] tegra_cec 70015000.tegra_cec: Can't find physical addresse.
[ 2.002630] tegra_cec 70015000.tegra_cec: tegra_cec_init Done.
[ 2.087867] systemd[1]: System time before build time, advancing clock.
[ 2.119051] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.130648] cgroup: cgroup2: unknown option "nsdelegate"
[ 2.150708] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 2.151426] systemd[1]: Detected architecture arm64.
[ 2.179963] systemd[1]: Set hostname to <linux>.
[ 2.210634] tegra-pcie 1003000.pcie: link 0 down, retrying
[ 2.212649] tegra-pcie 1003000.pcie: link 0 down, ignoring
[ 2.265759] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 2.265768] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 2.319052] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00
[ 2.319057] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 2.319061] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
[ 2.319064] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
[ 2.319068] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.319088] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400
[ 2.319149] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.319294] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 2.319395] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 2.319418] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff]
[ 2.319448] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
[ 2.319468] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
[ 2.319599] pci 0000:01:00.0: supports D1 D2
[ 2.319602] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.330738] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 2.330765] pci 0000:00:02.0: BAR 14: assigned [mem 0x13000000-0x130fffff]
[ 2.330769] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 2.330776] pci 0000:01:00.0: BAR 4: assigned [mem 0x13000000-0x13003fff 64bit]
[ 2.330793] pci 0000:01:00.0: BAR 2: assigned [mem 0x13004000-0x13004fff 64bit]
[ 2.330809] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff]
[ 2.330817] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 2.330820] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
[ 2.330826] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff]
[ 2.331081] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 2.331084] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 2.331089] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded
[ 2.331169] aer 0000:00:02.0:pcie002: service driver aer loaded
[ 2.331333] r8168 0000:01:00.0: enabling device (0000 -> 0003)
[ 2.331349] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded
[ 2.345374] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node
[ 2.345454] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:e6:d9:f9 from device tree
[ 2.345859] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 2.345872] r8168 Copyright (C) 2017 Realtek NIC software team <nicfae@realtek.com>
This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[ 2.402173] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.404149] systemd[1]: Created slice System Slice.
[ 2.404317] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.404422] systemd[1]: Listening on udev Kernel Socket.
[ 2.404451] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.404591] systemd[1]: Listening on Syslog Socket.
[ 2.404724] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 2.405007] systemd[1]: Listening on Journal Audit Socket.
[ 2.490163] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
[ 2.629259] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1)
[ 2.649107] systemd-journald[1886]: Received request to flush runtime journal from PID 1
[ 3.706483] random: crng init done
[ 3.709890] random: 7 urandom warning(s) missed due to ratelimiting
[ 4.130505] using random self ethernet address
[ 4.137810] using random host ethernet address
[ 5.104637] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.105869] eth0: 0xffffff800aab6000, 00:04:4b:e6:d9:f9, IRQ 407
[ 5.157889] Mass Storage Function, version: 2009/09/11
[ 5.157896] LUN: removable file: (no medium)
[ 5.163730] using random self ethernet address
[ 5.170581] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.172603] using random host ethernet address
[ 5.232978] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0
[ 5.232985] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0
[ 5.233959] rndis0: HOST MAC d6:55:e4:37:70:e4
[ 5.234198] rndis0: MAC d6:55:e4:37:70:e5
[ 5.235101] usb0: HOST MAC d6:55:e4:37:70:e6
[ 5.235136] usb0: MAC d6:55:e4:37:70:e7
[ 5.235157] tegra-xudc-new 700d0000.xudc: exiting ELPG
[ 5.239986] tegra-xudc-new 700d0000.xudc: exiting ELPG done
[ 5.240009] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled
[ 5.240040] tegra-xudc-new 700d0000.xudc: entering ELPG
[ 5.240289] tegra-xudc-new 700d0000.xudc: entering ELPG done
[ 5.240308] tegra-xudc-new 700d0000.xudc: exiting ELPG
[ 5.242571] tegra-xudc-new 700d0000.xudc: exiting ELPG done
[ 5.242725] tegra-xudc-new 700d0000.xudc: entering ELPG
[ 5.242985] tegra-xudc-new 700d0000.xudc: entering ELPG done
[ 5.250784] l4tbr0: port 1(rndis0) entered blocking state
[ 5.250789] l4tbr0: port 1(rndis0) entered disabled state
[ 5.251437] device rndis0 entered promiscuous mode
[ 5.274917] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
[ 5.279608] l4tbr0: port 2(usb0) entered blocking state
[ 5.279611] l4tbr0: port 2(usb0) entered disabled state
[ 5.283190] device usb0 entered promiscuous mode
[ 5.291323] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[ 5.334854] usb usb2: usb_suspend_both: status 0
[ 5.516580] zram: Added device: zram0
[ 5.519508] zram: Added device: zram1
[ 5.523406] zram: Added device: zram2
[ 5.524440] zram: Added device: zram3
[ 5.545827] zram0: detected capacity change from 0 to 519614464
[ 5.573321] Adding 507432k swap on /dev/zram0. Priority:5 extents:1 across:507432k SS
[ 5.577410] zram1: detected capacity change from 0 to 519614464
[ 5.592324] Adding 507432k swap on /dev/zram1. Priority:5 extents:1 across:507432k SS
[ 5.596069] zram2: detected capacity change from 0 to 519614464
[ 5.608472] Adding 507432k swap on /dev/zram2. Priority:5 extents:1 across:507432k SS
[ 5.612646] zram3: detected capacity change from 0 to 519614464
[ 5.627236] Adding 507432k swap on /dev/zram3. Priority:5 extents:1 across:507432k SS
[ 7.180155] tegradc tegradc.1: unblank
[ 7.180456] tegradc tegradc.0: blank - powerdown
[ 7.981652] fuse init (API version 7.26)
[ 8.050640] tegra-xusb 70090000.xusb: entering ELPG
[ 8.051652] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 1, speed 0
[ 8.051839] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 2, speed 0
[ 8.053410] tegra-xusb 70090000.xusb: entering ELPG done
[ 9.144358] tegradc tegradc.1: unblank
[ 9.144368] tegradc tegradc.0: blank - powerdown