Issue with NVIDIA Jetson Orin Nano and IMX662 Camera in DOL-HDR Mode

Autonomous Machines Jetson & Embedded Systems Jetson Orin Nano
15

Hi,ShaneCCC

Following your suggestions, the parameter wdr.DOL.v5[0].saturationThreshold.long has proven effective.

Through manual adjustments of both exposure and gain for the IMX662’s DOL long and short frames, I’ve achieved more realistic images.

imx662
imx6621581×833 84.2 KB

However, the issue of pinkish highlights still persists. My assumption is that adjusting the parameter wdr.DOL.v5[0].saturationThreshold.short might be the key, but regardless of the values I set for wdr.DOL.v5[0].saturationThreshold.short, there seems to be no noticeable effect.

Given this situation, I’m curious if there are any other parameters I should consider tweaking. As a point of comparison, I’ve attached an image captured using my smartphone’s HDR mode of the same scene for reference.

phone
phone1578×1096 115 KB

I greatly appreciate your ongoing assistance and insights in resolving this color issue.

Thank you