Jetson clocks does not enable cores

Hi,

I just got my Xavier NX, but I cannot enable cpu cores with sudo jetson_clocks

sudo jetson_clocks --show
SOC family:tegra194  Machine:NVIDIA Jetson Xavier NX Developer Kit
Online CPUs: 0-1
CPU Cluster Switching: Disabled
cpu0: Online=1 Governor=schedutil MinFreq=1497600 MaxFreq=1497600 CurrentFreq=1497600 IdleStates: C1=0 c6=0 
cpu1: Online=1 Governor=schedutil MinFreq=1497600 MaxFreq=1497600 CurrentFreq=1497600 IdleStates: C1=0 c6=0 
cpu2: Online=0 Governor=schedutil MinFreq=1497600 MaxFreq=1497600 CurrentFreq=1497600 IdleStates: C1=0 c6=0 
cpu3: Online=0 Governor=schedutil MinFreq=1497600 MaxFreq=1497600 CurrentFreq=1497600 IdleStates: C1=0 c6=0 
cpu4: Online=0 Governor=schedutil MinFreq=1497600 MaxFreq=1497600 CurrentFreq=1497600 IdleStates: C1=0 c6=0 
cpu5: Online=0 Governor=schedutil MinFreq=1497600 MaxFreq=1497600 CurrentFreq=1497600 IdleStates: C1=0 c6=0 
GPU MinFreq=803250000 MaxFreq=803250000 CurrentFreq=803250000
EMC MinFreq=204000000 MaxFreq=1600000000 CurrentFreq=1600000000 FreqOverride=1
Fan: speed=255
NV Power Mode: MODE_10W_2CORE

Here are the outputs of some commands:

tegrastats 
RAM 937/7764MB (lfb 376x4MB) SWAP 0/3882MB (cached 0MB) CPU [0%@1497,0%@1497,off,off,off,off] EMC_FREQ 0% GR3D_FREQ 0% AO@31.5C GPU@31C PMIC@100C AUX@30.5C CPU@31.5C thermal@30.95C VDD_IN 2613/2613 VDD_CPU_GPU_CV 285/285 VDD_SOC 1059/1059

It is managed by nvpmodel. You may use nvpmodel before jestson_clocks:

sudo nvpmodel -m0
sudo jetson_clocks

Thanks,
figured it out just before your reply!

for more on Supported Modes and Power Efficiency, go to the following page.
https://docs.nvidia.com/jetson/l4t/index.html#page/Tegra%20Linux%20Driver%20Package%20Development%20Guide%2Fpower_management_jetson_xavier.html%23wwpID0E0NO0HA

1 Like