Jetson nano 2gb, raspicam wide FOV does not work

Autonomous Machines Jetson & Embedded Systems Jetson Nano
,
1

Hello !

I have a Jetson Nano dev kit 2gb, bought last month. It has Jetpack 4.6

USB cameras are working fine, but the Raspberry Pi camera with wide FOV is not working.

vision@vision-desktop:~$ sudo modprobe bcm2835-v4l2
modprobe: FATAL: Module bcm2835-v4l2 not found in directory /lib/modules/4.9.253-tegra
vision@vision-desktop:~$ sudo modprobe v4l2loopback
modprobe: FATAL: Module v4l2loopback not found in directory /lib/modules/4.9.253-tegra

Next,
vision@vision-desktop:~$ v4l2-ctl --list-devices
Failed to open /dev/video0: No such file or directory
vision@vision-desktop:~$ ls /dev/video*
ls: cannot access ‘/dev/video*’: No such file or directory
vision@vision-desktop:~$ ls -l /dev/video*
ls: cannot access ‘/dev/video*’: No such file or directory
vision@vision-desktop:~$

I tried installing the BCM driver from the webpage and it did not help.
Camera is good, is working on my RPI
I restarted the jetson several times

Any help would be well regarded.

3

There is no update from you for a period, assuming this is not an issue any more.
Hence we are closing this topic. If need further support, please open a new one.
Thanks

hello smandrei96,

may I know which camera module it is.
did you confirm this is workable sensor driver for Nano platforms?