Jetson nano boot failure

[DavidDDD]

Hi,

Could you try to access and run

sudo i2cdump -y 7 0x50

Also please refer to this topics to flash without reading eeprom

Jetson Nano does not boot up

Parsing baseboard EEPROM: --- Parsing board ID (ERROR: calculated CRC8 0xd0 != stored CRC8 0x21) succeeded. --- Parsing board version (ERROR: calculated CRC8 0xd0 != stored CRC8 0x21) succeeded. --- Parsing board SKU (ERROR: calculated CRC8 0xd0 != stored CRC8 0x21) succeeded. --- Parsing board REV (ERROR: calculated CRC8 0xd0 != stored CRC8 0x21) succeeded. Parsing module EEPROM: --- Parsing board ID (ERROR: calculated CRC8 0xd0 != stored CRC8 0x21) succeeded. --- Parsing board version (ERROR: …

Thanks