We have designed a custom carrier board for a Jetson Nano. We have wicked power up problem that occurs, typical at high or low temperatures, although we have seen this problem at room temperature on certain units. Below is a bad boot: [image] Below is a good boot: [image] We followed the Jetson…

[image] Shadowmind: The unit successfully booted once, then was shut down and would not boot up for the second power cycle. This looks like some component broken. How many modules have you tested? If the module are all good now, then it should be the carrier board component. The power sequen…

Jetson Nano power up issues over temperature

Robotics & Edge Computing Jetson Systems Jetson Nano

Topic		Replies	Views
Power-On timing Jetson Nano	7	1460	October 14, 2021
What is the minimum HW requirement for boot up? Jetson Nano	8	580	October 14, 2021
Some Jetson NANO Modules are booting fail on the custom board Jetson Nano boot , board-design	28	1520	July 8, 2022
Jetson nano production SOM is not booting on custom carrier board Jetson Nano boot , board-design	8	781	March 30, 2022
Jetson Nano on the custom Carrier board Power-On problem Jetson Nano boot , board-design	2	381	February 27, 2024
All the power supplies controlled by the NANO core board are not available Jetson Nano power	7	153	November 20, 2024
Jetson Nano B01 Dev Kit Power Issue Jetson Nano power-on	4	861	October 18, 2021
The carrier board of the jetson nano is not behaving like it used to [Jetson nano 2gb] Jetson Nano boot	4	369	June 9, 2023
Jetson Nano reboot failures Jetson Nano board-design , reboot	25	1838	March 22, 2023
Is my USB power supply broken or my Jetson Nano broken? Jetson Nano power	7	1708	October 18, 2021

Jetson Nano power up issues over temperature

Related topics