Hello While the detectors (deepstream-emotion/gaze-app) are running, I get the system notification “System throttled due to Over-current” - warnings in online and offline mode - processing of the video stream from the webcam, and video files, respectively. Judging by the graphs, the reason is the …

please check [image] The error message "System throttling due to over-current" appears when running YOLOv4 Jetson Xavier NX Need to make some clarifications for this issue. The OC throttling case also appears in jetpack4.4.1. The real cause that makes you feel this is…

[image] System throttled due to over-current? Jetson Xavier NX hi all, could you please have the workaround to increase instantaneous OC limit, from 3.6A to 5A; this 5A workaround should still acceptable with hardware aspect. please have below command to set 5A instanta…

Hello Unfortunately, the command does not work, a message is displayed stating that the directory is not available: professorx@ubuntu:~$ sudo echo 5000 > /sys/devices/c250000.i2c/i2c-7/7-0040/iio:device0/crit_current_limit_0 bash: /sys/devices/c250000.i2c/i2c-7/7-0040/iio:device0/crit_current_limi…

Hi, If you are on rel-35, then you don’t need to apply this command. The rel-35 already uses 5A by default.

[image] WayneWWW: rel-35 Can you please elaborate?

Not sure what to elaborate here. JP4 is using rel-32 branch. JP5 is using rel-35 branch. All jp5 release already set the OC limit of XNX to 5A. It is okay that you cannot find that node to configure because there is no need to configure it at all.

I’m sorry, but for all the time I’ve been working with Jetson, I’ve gotten used to orienting myself in JetPack version numbers (but not in kernel versions), so I didn’t immediately understand the essence of the issue. Okay, I’ll try to take this information into account in the future. However, I st…

Hi, There is no solution to “fix” this problem. This problem is simply indicating your usecase has exceed the max load Xavier NX can take. You can only adjust the power model and also see if you can adjust your usecase.

[image] WayneWWW: You can only adjust the power model and also see if you can adjust your usecase. Do you mean the selection of Jetson’s operating mode: power and number of CPU cores used - “10W 4 CORE”, “20W 6 CORE”, etc.? In general, is the current limit at the software level or at the har…

Hello Still, I would like to hear the answer, please. [image] Jetson Xavier NX: System throttled due to Over-current Jetson Xavier NX Do you mean the selection of Jetson’s operating mode: power and number of CPU cores used - “10W 4 CORE”, “20W 6 CORE”, etc.? In general, …

Jetson Xavier NX: System throttled due to Over-current

Robotics & Edge Computing Jetson Systems Jetson Xavier NX

violator86 March 21, 2023, 1:05am 4

Topic		Replies	Views
System throttled due to over-current? Jetson Xavier NX power , nvbugs	55	30816	July 15, 2021
System throttled due to Over-current when use camera Jetson Xavier NX camera , usb , power	2	1597	June 21, 2021
System throttled due to Over-Current! - DeepStream 5.1 with just 4 video streams! DeepStream SDK power , nvbugs , performance	17	3410	May 24, 2021
System throttling due to over-current on JP4.6.2 Jetson Xavier NX power , power_estimator	2	1118	February 8, 2023
Questions about system throttling due to overcurrent Jetson Xavier NX power , thermal , power_estimator	4	2030	July 13, 2022
System Throttle Due to Over-Current Jetson Xavier NX tensorrt , camera , jetson-inference , gstreamer , python	6	855	August 11, 2023
System Throttled due to Overcurrent in Xavier NX Jetson Xavier NX camera , encoder	5	1593	November 8, 2022
Jetpack 5.1 Overcurrent Warning Jetson Xavier NX power	3	435	February 5, 2024
Change default current limit of jetson xavier System Management and Monitoring (NVML) power	0	809	August 4, 2022
Help with system throttled due to over-current warning Jetson Orin NX rtsp , gstreamer	2	738	November 16, 2023

Jetson Xavier NX: System throttled due to Over-current

Related topics