Nvargus Nvraw Tool couldn't recognize my sensor

[ShaneCCC]

Looks like argus don’t recognize any camera.
You may need to check the context of tegra-camear-platform{} special the devname strings.

Reference to below topic.

Nvarguscamerasrc Error : “No cameras available"

We have a custom board with an IMX335 image sensor and a Jetson Nano. We are developing a custom driver for the image sensor(IMX335). The Image sensor(IMX335) is connected to the i2c-2 (i2c@7000c500) of jetson nano, not in cam-i2c pins and four lanes of MIP/CSI is used to take stream. The device tree of the image sensor(IMX335) is attached below. tegra210-camera-rbpcv2-imx335.dtsi (8.3 KB) After loading the driver, we were able to capture the raw frames using v4l2 application, but our req…