What’s wrong with nvautoflash and my system? $ wget https://developer.nvidia.com/downloads/embedded/l4t/r36_release_v4.3/release/Jetson_Linux_r36.4.3_aarch64.tbz2 $ wget https://developer.nvidia.com/downloads/embedded/l4t/r36_release_v4.3/release/Tegra_Linux_Sample-Root-Filesystem_r36.4.3_aarch64.t…

nvautoflash.sh is just a wrapper of flash.sh. Flash.sh cannot flash things to external drive. Only initrd flash can. Thus, nvautoflash won’t work on Orin NX and Orin Nano because these 2 by their nature only have external boot medium.

please dump serial console log from UART during flash.

See above log files, they are from seiral console.

They are not serial console from UART… Those are just log from your host PC which we don’t need. Please read below [image] Jetson Nano & NX Style - Serial Debug Console - JetsonHacks The Serial Debug Console is the most basic way to be able to interface with your Jetson Nano & NX Style…

[image] daniel2008_12: Detailed log: nvautoflash_r36.4.3.log (94.7 KB) [image] daniel2008_12: flash_4-1_0_20250126-144142.log (47.5 KB) Did you check those logs???

Yes, I did. As I already told, these are not serial console log from UART. Serial console log from UART means the log from Jetson itself. What you provided are all host side log.

OK. From above discription I have provided: step with nvautoflash current host side logs Is there anything wrong ?

We need the device side log to see why flash gets failure. What you provided are just half the information. This half information is not sufficient to check this error.

And we have this device under dev, I don’t have time to give you the uart log asap. Since I have met this issue at least three times. Is there any thing wrong with host side log and steps for nvautoflash from dev’s view?

Yes, it’s OK with initrd script as I used to do. I just tried nvautoflash for r36.4.3, bad luck too. [image] daniel2008_12: EDIT2: I have sucessfully flashed system with following commands: flash_4-1_0_20250126-144142.log (47.5 KB) sudo ./tools/kernel_flash/l4t_initrd_flash.sh --external-dev…

Nvautoflash r36.4.3 jetpack6.2 stucked

Robotics & Edge Computing Jetson Systems Jetson Orin Nano

KevinFFF February 3, 2025, 8:23am 11

Hi daniel2008_12,

per previous topic 312359 with r35.6.0, we’ve suggested using initrd script to flash external NVMe SSD.

Topic		Replies	Views
Flashing L4T 36.2 on orin Nano/NX Jetson Orin Nano reflash	2	1143	January 5, 2024
Unable to flash the NVME (r36.2 Jetpack 6.0DP) Jetson Orin Nano reflash	3	173	April 14, 2025
Cannot flash jetson orin nano with any method Jetson Orin Nano reflash	10	1567	April 19, 2024
Problem flashing L4T 36.2 on new jetson orin nano module Jetson Orin Nano reflash	10	225	October 7, 2025
Jetpack 6.2 Installation Failing [Jetson Orin Nano Dev Kit 8GB] Jetson Orin Nano reflash	7	694	February 10, 2025
Please help with flashing a Jetson Orin Nano via an SDK manager Jetson Orin Nano sdkm	6	1036	February 26, 2024
Jetson Linux 36.3 : after flashing Orin Nano，It turns out to be Orin NX Jetson Orin Nano boot	11	295	May 19, 2025
Unable to boot after flash R36 to Jetson Orin Nano 8GB Devkit with SDK Manager Jetson Orin Nano reflash	7	590	December 10, 2023
Orin Nano 4GB is failing for flash Jetson Orin Nano reflash	2	556	July 3, 2023
Unable to Flash R36 on Orin Nano 8GB Dev Kit Using External Storage Jetson Orin Nano reflash	30	3912	January 6, 2024

Nvautoflash r36.4.3 jetpack6.2 stucked

Related topics