Hi, I have a Jetson Nano B01 AI development kit that isn’t booting correctly from an SD card image. I have followed the steps below as instructed to by the Jetson nano getting started page and am a Windows 10 user. Download the jetson-nano-jp451-sd-card-image from the Nvidia website Prepare a 64G…

Hi, I downloaded the image from the ‘Getting Started with Jetson Nano Developer Kit’ page and then the sub-page ’ Write Image to the microSD Card’. I have just opened the download from the page you posted and the folder title of the download is the same as the images I have already downloaded and …

Some users tell me the image on “Getting Started with Jetson Nano Developer Kit” is broken and the one from download center is fine. I don’t have device to validate that yet.

Prepare a 64GB Sandisk Ultra micro-SD card by clearing and formatting to exFAT Have you tried to format to ext4 instead of exFAT?

Hi, I have downloaded the image from the download centre and tried flashing it to two separate 64GB Sandisk Ultra micro-SD cards, one formatted as exFAT and the other as ext4. Both produced the same boot log below and no output over HDMI. [0000.125] [L4T TegraBoot] (version 00.00.2018.01-l4t-e8225…

[image] kipper121314: [0000.311] QSPI-ONLY: SkipQspiOnlyFlag = 0 [0000.315] Nano-SD: checking PT table on QSPI … I checked this error again. If this error is on QSPI, then replacing sdcard is not able to resolve this issue. The only way that can work on your side is finding a ubuntu host an…

Just resolved the same case as yours. [image] Jetson Nano no longer displays or boots Jetson Nano The SDK fixed the problem thank you! I imaged the Jetbot version 0.4.3 (JetPack version 4.5) found here: Using SD Card Image - JetBot Then I turned on the nano with the PIOL…

OK I’ll try and find a ubuntu host and use SDKmanager. Thanks for your help.

Hi, OK so I have tried quite a few things to get past this and nothing has worked. I have got access to a Linux machine running Ubuntu and downloaded SDK manager. I Installed a freshly formatted 64Gb micro-SD, both exFAT and ext4 tried Discovered the device in SDK manager and tried installing th…

My suggestion here is Use jetpack 4.5.1 first Directly use flash.sh to save the time. We focus on the system side issue first. No need to care about sdk now. Dump the log from uart during flash if possible. It can tell us what happens. https://elinux.org/Jetson/General_debug

I’m fairly new to using Linux so could you please break down those steps a little further? When you say use jetpack 4.5.1, is that downloading the jetson-nano-jp451-sd-card-image.zip? Assuming 1. is correct, do I then follow the same steps as above i.e: go into the same directory in the terminal …

Nvidia Jetson Nano B01 AI development kit not booting, PT: Partition TBC NOT found!

Robotics & Edge Computing Jetson Systems Jetson Nano

WayneWWW March 7, 2021, 8:14am 9

Just resolved the same case as yours.

Topic		Replies	Views
[BOOT] Nothing happend after following the Quick Start Guide Jetson Nano	6	838	October 31, 2019
Jetson Nano B01 Boot Issue Jetson Nano boot	12	610	August 16, 2023
Jetson NanoWill Not Boot on Known Good SD Card Jetson Nano boot	26	2141	October 15, 2021
Jetson Nano does not boot up Jetson Nano	17	3044	October 15, 2021
Jetson 4GB Nano 4GB SDK does not boot Jetson Nano boot	28	2325	July 13, 2021
Jetson Nano failed to boot and stuck in uboot Jetson Nano	22	4892	October 15, 2021
Jetson Nano 4GB -- Powering issue Jetson Nano boot	21	539	July 3, 2024
Jetson Nano fails to boot and cannot enter the system Jetson Nano boot	30	4247	February 9, 2022
Jetson nano dev Kit B01 Not booting after setup Jetson Nano boot	19	857	December 19, 2023
Jetson nano Kit B01 Bricked Jetson Nano boot	45	3522	October 15, 2021

Nvidia Jetson Nano B01 AI development kit not booting, PT: Partition TBC NOT found!

Related topics