Please provide the following info (tick the boxes after creating this topic): Software Version DRIVE OS 6.0.8.1 DRIVE OS 6.0.6 DRIVE OS 6.0.5 DRIVE OS 6.0.4 (rev. 1) DRIVE OS 6.0.4 SDK other Target Operating System Linux QNX other Hardware Platform DRIVE AGX Orin Developer Kit…

Please refer to the “Bind and flash the Tegra board” example in the “To flash Yocto built images via bootburn” document page . Run the bind_partitions command with your specified board (“p3710-10-s05” as per your post).

Please refer to Install DRIVE OS Linux Docker Containers from NGC to set up the docker environment on your host system for compiling the kernel steps mentioned in the topic.

Thanks for the prompt reply. I have followed the steps and was able to flash the DRIVE OS to the device from the host (inside a docker container in host). The docker container has a signature from docker image list command as nvcr.io/drive/driveos-sdk/drive-agx-orin-linux-aarch64-sdk-build-x86 6.0…

It should be the default path, /drive, when running the docker container.

Thanks! Another question, So far I have finished all the steps in here with the necessary modification from another thread. Now I am looking at step 14 and did not know where the SDK Bootburn tool is. Is it inside the same docker container? If so, is there an instruction on how to use this tool to …

I followed through the steps and use the simple method to flash ./flash.py /dev/ttyACM1 p3710. The docker container is still unable to start. Here is the log from the flashing. log_jn1q76tzm3suvapgxdwlcy8b4kfeh9i0.txt (2.1 KB) The error in starting the docker reads below: docker: Error response …

Recompiling the kernel for enabling docker containers on the DRIVE device

Autonomous Vehicles DRIVE AGX Orin DRIVE AGX Orin General

herbert1 February 1, 2024, 7:34pm 8

Additional information. The links in this thread are broken where the thread seemed to have a solution.

A detailed device information:

Part number: 940-63710-0010-D00
Platform: p3710
Detailed model number: p3710-10-s05

Topic		Replies	Views
Docker Support DriveOS 6.0.8.1 DRIVE AGX Orin General docker	26	2330	April 19, 2024
No changes in menuconfig while rebuilding kernel for docker enabling DRIVE AGX Orin General docker , driveos	6	228	April 1, 2025
Issue on Kernel Rebuild for DRIVE AGX Orin with DRIVE OS 6.0.8.1 DRIVE AGX Orin General driveos	2	493	April 5, 2024
Running Docker Containers Directly on NVIDIA DRIVE AGX Orin Technical Blog	17	2144	April 25, 2023
Kernel 5.15 compile instructions fail - 6.0.9.0 DRIVE AGX Orin General driveos	2	355	May 16, 2024
Building Docker Container on DRIVE ORIN DRIVE AGX Orin General docker	10	317	July 21, 2025
Docker on top of AGX orin hardware with 6.0.6 DRIVE AGX Orin General docker	20	1552	June 14, 2023
NVIDIA DRIVE OS change kernel Image DRIVE AGX Orin General driveos	2	750	September 16, 2022
Building Docker Container on DRIVE ORIN DRIVE AGX Orin General docker , driveos	2	154	July 11, 2025
Is it possible to emulate the Nvidia Drive Orin family in a docker, on a regular PC? DRIVE AGX Orin General docker , drive-platform-setup	3	718	April 12, 2023

Recompiling the kernel for enabling docker containers on the DRIVE device

Related topics