Sorry, another Jeston Orin Nano flash failure to 5.13

Robotics & Edge Computing Jetson Systems Jetson Orin Nano
1

Sorry, another Jeston Orin Nano flash failure. Just received 2 brand new Nano’s and trying to flash to 5.13. They both boot to this screen, flash some more text for an instant and shuts down and never boots up again. Tried multiple SD cards across both Nano’s.

Read through some other posts and I am not sure where to pull these log files from to display or what the next step should be. Don’t have any other way to connect or flash other than SD. Not sure where to go or what to try.

Thanks, Mike

image
image641×481 98.8 KB

2

Just to make sure I am doing this right, the downloaded file after unzipping was sd-blob and I used BalenaEtcher to write the image to the SD card.

6

Hi,

Please try to upgrade to the latest version JetPack 5.1.6 or JetPack 6.2.2 to cross check whether issue occurs.

Thanks

7

That worked and I feel bad for posting now. Everything I read said you had to flash to an earlier version. Thanks again!