SPI nor-flash boot part number

Autonomous Machines Jetson & Embedded Systems Jetson TK1
5

Hi alejuventino,

could someone confirm that the BootRom SPI controller needs a JEDEC read ID compliance ?
ie the SPI flash has to be one of those :
http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt

TK1 BootROM should be able to support SPI ROM boot using standard JEDEC READ 0x03 and RDSR 0x05 commands.
BootROM does not require JEDEC READ_ID 0x90/0xAB command.

Thanks