There are resistors falled off from Orin, but the device is still functioning normally. Should the resistors be soldered back or left alone? Additionally, one of the insulating films has fallen off, exposing the copper wires inside. What should be used to fix it?
Please provide the following info (tick the boxes after creating this topic):
Software Version
DRIVE OS 6.0.8.1
DRIVE OS 6.0.6
DRIVE OS 6.0.5
DRIVE OS 6.0.4 (rev. 1)
DRIVE OS 6.0.4 SDK
[✔] other
Target Operating System
Linux
QNX
[✔] other
Hardware Platform
DRIVE AGX Orin Developer Kit (940-63710-0010-300)
DRIVE AGX Orin Developer Kit (940-63710-0010-200)
DRIVE AGX Orin Developer Kit (940-63710-0010-100)
DRIVE AGX Orin Developer Kit (940-63710-0010-D00)
DRIVE AGX Orin Developer Kit (940-63710-0010-C00)
DRIVE AGX Orin Developer Kit (not sure its number)
[✔] other
SDK Manager Version
1.9.3.10904
[✔] other
Host Machine Version
[✔] native Ubuntu Linux 20.04 Host installed with SDK Manager
native Ubuntu Linux 20.04 Host installed with DRIVE OS Docker Containers
native Ubuntu Linux 18.04 Host installed with DRIVE OS Docker Containers
other