Hi JerryChang,
I followed your instruction but nothing output from THS2.
- It seems like THS2 is enabled.
p@p-desktop:~$ dmesg | grep THS
[ 0.940063] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 33, base_baud = 0) is a TEGRA_UART
[ 0.941255] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 34, base_baud = 0) is a TEGRA_UART
[ 0.942203] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 35, base_baud = 0) is a TEGRA_UART
- After I removed “serial” part from Linux_for_Tegra/bootloader/t186ref/tegra186-bpmp-p3636-0001-a00-00.dtb.
BPMP logs are not output now.
Is there anything I can check?
(I’m using TX2 NX with R32.5.1)
Thx
Yen