Hi,We designed a carrier board based on P2597,we removed the power monitoring circuits(INA3221) ,GPIO expander circuits(TCA9539) and usb2.0 (usb0) circuits. Later, we connected a TX2 module to debug the functions, the USB3.0(USB_SS0+USB1) interface is not work . In jetpack 3.3 version, we modified …

Hi, If you still face issues, please execute xxd to check device tree after booting the system: $ xxd /proc/device-tree/xusb_padctl@3520000/ports/usb2-0/status 00000000: 6f6b 6179 00 okay. To ensure the modification is correctly applied.

Tx2 USB3.0 not work

Robotics & Edge Computing Jetson & Embedded Systems Jetson TX2

DaneLLL May 25, 2020, 8:55am 3

Hi,
Please refer to adaptation guide for device tree programming:

A few examples for your reference:

Topic		Replies	Views
USB3.0 not working with TX2i, but with TX2 working fine Jetson TX2	6	736	October 18, 2021
Problem to implement two USB3.0 port on Customized carrier board for Jetson TX2 Jetson TX2 hw , usb , board-design	16	1347	October 18, 2021
USB problem on custom board with R32.1 Jetson TX2	3	727	October 18, 2021
USB not working in Jetson TX2 - R32.2 Jetson TX2	6	4908	October 18, 2021
TX2 USB3.0 Port Not working Jetson TX2 kernel , ubuntu , usb , board-design	28	2608	October 18, 2021
TX2 config#4 for USB LANE MAPPING Jetson TX2	13	973	October 18, 2021
All USB3.0 enable Jetson TX2 usb	2	970	October 18, 2021
Lack of USB on Jetson TX2 Jetson TX2	11	967	October 18, 2021
TX2 R32.4.4, JetPack 4.4 Cannot open USB Jetson TX2 boot , kernel , power	2	889	October 18, 2021
Failed to connect USB3-2 on TX2 customized board Jetson TX2 usb , board-design	26	2068	October 18, 2021

Tx2 USB3.0 not work

Related topics