Unable to clone jetson orin with jetpack 5.0.2 using flash.sh - ERROR: might be timeout in USB write

Autonomous Machines Jetson & Embedded Systems Jetson AGX Orin
5

Hi JerryChang,

I tried that as well but still hit the same error:

Command Run:

~/nvidia/nvidia_sdk/JetPack_5.0.2_Linux_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra sudo ./tools/backup_restore/l4t_backup_restore.sh -b -c jetson-agx-orin-devkit

Trailing log output:

[   0.1981 ] mb1_t234_prod_aligned_sigheader.bin.encrypt filename is from images_list
[   0.1982 ] psc_bl1_t234_prod_aligned_sigheader.bin.encrypt filename is from images_list
[   0.1983 ] Boot Rom communication
[   0.1995 ] tegrarcm_v2 --new_session --chip 0x23 0 --uid --download bct_br br_bct_BR.bct --download mb1 mb1_t234_prod_aligned_sigheader.bin.encrypt --download psc_bl1 psc_bl1_t234_prod_aligned_sigheader.bin.encrypt --download bct_mb1 mb1_bct_MB1_sigheader.bct.encrypt
[   0.2007 ] BR_CID: 0x80012344705DD2836400000003FE0180
[   0.6318 ] Sending bct_br
[   1.0748 ] ERROR: might be timeout in USB write.
Error: Return value 3
Command tegrarcm_v2 --new_session --chip 0x23 0 --uid --download bct_br br_bct_BR.bct --download mb1 mb1_t234_prod_aligned_sigheader.bin.encrypt --download psc_bl1 psc_bl1_t234_prod_aligned_sigheader.bin.encrypt --download bct_mb1 mb1_bct_MB1_sigheader.bct.encrypt
Reading board information failed.
Cleaning up...

Could this be a hardware issue? As previously stated, i tried multiple cables and laptops.