7-Inch Capacitive Touch Screen for Jetson Nano


I am looking for a Capacitive Touch Screen for the Jetson Nano. The idea is to use the: 7-Inch-1024x600 Capacitive Touch Screen (Extend Two USB HOST Port) SKU: EP-0085 for Seeed Studio.


It is an HDMI display, that supports Linux and is also used for Raspberry Pi. Have somebody experience with this type of display on the Jetson Nano. Can I use this screen with Jetson Nano?

Thanks for the feedback.


Shouldn’t be an issue. I use an 11" 1920x1080 display with a capacitive touch screen and have no issues. Linux support for multi-touch is somewhat limited so you may need use a program like “twofing” (http://www.plippo.de/p/twofing) to get right click working.