Hello, i would like to bring up our mipi 4-lane RGB and ToF camera on the AGX Xavier.(total 2) So i looked into the documents (datasheet, Camera module HW design Guide), i have a plan to make a camera interposer module, and i have questions. my questions are as follow : How do i integrate CSI …

I’m closing this topic due to there is no update from you for a period, assuming this issue was resolved. If still need the support, please open a new topic. Thanks Please give more information. [image] Kei_Ko: how should I configure pins for the CTRL connected to the Sensor Module Connector? …

Bring up the 4-lane MIPI camera on the AGX Xavier

Robotics & Edge Computing Jetson & Embedded Systems Jetson AGX Xavier

system Closed May 11, 2022, 3:11am 9

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.

Topic		Replies	Views
How to configure CSI MIPI 2x4 lanes Jetson TX1	3	1606	October 18, 2021
Multiple CSI camera support @30fps Jetson AGX Xavier	3	594	October 18, 2021
4-Lane CSI interface TX1/TX2 Jetson TX1	3	829	October 18, 2021
AGX MIPI Camera Interface Config Mode Jetson AGX Xavier camera , board-design	2	544	October 18, 2021
4 CSI-MIPI camera setup with Xavier 8GB - corr_err: discarding frame Jetson AGX Xavier camera	3	1067	October 18, 2021
MIPI LANE configuration support Jetson TX1	4	1064	October 18, 2021
Connector MIPI 2 and 4 lanes Jetson Nano	2	1131	October 18, 2021
Jetson Xavier NX + 4 MIPI CSI-2 connectors Jetson Xavier NX board-design	2	446	October 18, 2021
CSI MIPI interface Jetson AGX Xavier	2	452	October 18, 2021
about mipi csi interface Jetson TX2	2	723	October 18, 2021

Bring up the 4-lane MIPI camera on the AGX Xavier

Related topics