Cannot connect to camera by nvsipl_sample

Please provide the following info (tick the boxes after creating this topic):
Software Version
DRIVE OS 6.0.4 SDK
other

Target Operating System
Linux
QNX
other

Hardware Platform
DRIVE AGX Orin Developer Kit (940-63710-0010-D00)
DRIVE AGX Orin Developer Kit (940-63710-0010-C00)
DRIVE AGX Orin Developer Kit (not sure its number)
other

SDK Manager Version
1.8.3.10426
other

Host Machine Version
native Ubuntu Linux 20.04 Host installed with SDK Manager
native Ubuntu Linux 20.04 Host installed with DRIVE OS Docker Containers
native Ubuntu Linux 18.04 Host installed with DRIVE OS Docker Containers
other

Hi everyone,

I try to connect my GMSL camera Valeo with imager Sony IMX 390 by the camera group C by the command :

./nvsipl_sample -p IMX390_C_3461_F200_RGGB_CPHY_x4

I received this error :

valeo@tegra-ubuntu:/opt/nvidia/drive-linux/samples/nvmedia/nvsipl/test/sample$ ./nvsipl_sample -p IMX390_C_3461_F200_RGGB_CPHY_x4
nvsipl_sample: ERROR: INvSIPLCamera::SetPlatformCfg() failed, status: 10

I have checked the connection between the target and the cameras, it seem to be not activated.

Could you help me to run this sample app?
Thanks for your supports

Dear @chi-nguyen.tran,
Could you check connecting to port B and test?

Hi @SivaRamaKrishnaNV ,
I have tested with 4 ports but same error.

After checking, i think there are no connection at GMSL ports. I don’t know if i have to enable any configuration to use these ports?
Thank you in advance

Hi @chi-nguyen.tran
This module isn’t in the supported cameras. I don’t think we have verified it. Are you trying to bring up the camera module?
camera bring-up needs collateral documents (not available on the developer site) and the support is also not through the forum.


I found it in the list of commands section of NVIDIA DRIVE OS 6.0 Linux SDK Developer Guide and it is mentioned that it is supported on P3710

It’s not for Valeo IMX390 camera module. For custom camera module bring-up, please contact your nvidia representative to make sure material access and support is available.